flow: Enable PARALLEL_EVAL setup repair in 38 designs

docs/user/FlowVariables.md

@@ -277,6 +277,7 @@ configuration file.
 | <a name="SEAL_GDS"></a>SEAL_GDS| Seal macro to place around the design.| |
 | <a name="SEC_CHECK"></a>SEC_CHECK| Perform a sequential equivalence check between the initial synthesis netlist and final netlist with the Kepler Formal PDR engine. If this fails, report an issue to OpenROAD.| 0|
 | <a name="SETUP_MOVE_SEQUENCE"></a>SETUP_MOVE_SEQUENCE| Passed as -sequence to repair_timing. This should be a string of move keywords separated by commas.| |
+| <a name="SETUP_REPAIR_PHASES"></a>SETUP_REPAIR_PHASES| Passed as -phases to repair_timing. This should be a string of setup repair phase names separated by spaces. Set to PARALLEL_EVAL to repair setup timing with the experimental parallel evaluation policy. When unset, repair_timing runs its default phases.| |
 | <a name="SETUP_SLACK_MARGIN"></a>SETUP_SLACK_MARGIN| Specifies a time margin for the slack when fixing setup violations. This option allows you to overfix or underfix(negative value, terminate retiming before 0 or positive slack). See HOLD_SLACK_MARGIN for more details.| 0|
 | <a name="SKIP_ANTENNA_REPAIR"></a>SKIP_ANTENNA_REPAIR| Skips antenna repair entirely.| 0|
 | <a name="SKIP_ANTENNA_REPAIR_POST_DRT"></a>SKIP_ANTENNA_REPAIR_POST_DRT| Skips antenna repair post-detailed routing.| 0|
@@ -457,6 +458,7 @@ configuration file.
 - [RTLMP_RPT_DIR](#RTLMP_RPT_DIR)
 - [RTLMP_WIRELENGTH_WT](#RTLMP_WIRELENGTH_WT)
 - [SETUP_MOVE_SEQUENCE](#SETUP_MOVE_SEQUENCE)
+- [SETUP_REPAIR_PHASES](#SETUP_REPAIR_PHASES)
 - [SETUP_SLACK_MARGIN](#SETUP_SLACK_MARGIN)
 - [SKIP_BUFFER_REMOVAL](#SKIP_BUFFER_REMOVAL)
 - [SKIP_CRIT_VT_SWAP](#SKIP_CRIT_VT_SWAP)
@@ -516,6 +518,7 @@ configuration file.
 - [PRE_RESIZE_TCL](#PRE_RESIZE_TCL)
 - [REPORT_ENDPOINT_SLACK](#REPORT_ENDPOINT_SLACK)
 - [ROUTING_LAYER_ADJUSTMENT](#ROUTING_LAYER_ADJUSTMENT)
+- [SETUP_REPAIR_PHASES](#SETUP_REPAIR_PHASES)
 - [SKIP_REPORT_METRICS](#SKIP_REPORT_METRICS)
 - [TNS_END_PERCENT](#TNS_END_PERCENT)
 
@@ -540,6 +543,7 @@ configuration file.
 - [REPORT_CLOCK_SKEW](#REPORT_CLOCK_SKEW)
 - [REPORT_ENDPOINT_SLACK](#REPORT_ENDPOINT_SLACK)
 - [SETUP_MOVE_SEQUENCE](#SETUP_MOVE_SEQUENCE)
+- [SETUP_REPAIR_PHASES](#SETUP_REPAIR_PHASES)
 - [SETUP_SLACK_MARGIN](#SETUP_SLACK_MARGIN)
 - [SKIP_BUFFER_REMOVAL](#SKIP_BUFFER_REMOVAL)
 - [SKIP_CRIT_VT_SWAP](#SKIP_CRIT_VT_SWAP)
@@ -571,6 +575,7 @@ configuration file.
 - [REPORT_ENDPOINT_SLACK](#REPORT_ENDPOINT_SLACK)
 - [ROUTING_LAYER_ADJUSTMENT](#ROUTING_LAYER_ADJUSTMENT)
 - [SETUP_MOVE_SEQUENCE](#SETUP_MOVE_SEQUENCE)
+- [SETUP_REPAIR_PHASES](#SETUP_REPAIR_PHASES)
 - [SETUP_SLACK_MARGIN](#SETUP_SLACK_MARGIN)
 - [SKIP_ANTENNA_REPAIR](#SKIP_ANTENNA_REPAIR)
 - [SKIP_BUFFER_REMOVAL](#SKIP_BUFFER_REMOVAL)

flow/designs/asap7/aes/config.mk

@@ -11,6 +11,7 @@ export CORE_ASPECT_RATIO        = 1
 export CORE_MARGIN              = 2
 export PLACE_DENSITY            = 0.65
 export TNS_END_PERCENT          = 100
+export SETUP_REPAIR_PHASES = PARALLEL_EVAL
 export GPL_PLACE_IOS            = 1
 
 ifeq ($(FLOW_VARIANT),top)

flow/designs/asap7/aes_lvt/config.mk

@@ -13,6 +13,7 @@ export CORE_ASPECT_RATIO      = 1
 export CORE_MARGIN            = 2
 export PLACE_DENSITY          = 0.65
 export TNS_END_PERCENT        = 100
+export SETUP_REPAIR_PHASES = PARALLEL_EVAL
 
 export ASAP7_USE_VT           = LVT
 

flow/designs/asap7/chi_async_bridge/config.mk

@@ -37,3 +37,4 @@ export VERILOG_TOP_PARAMS     = REQ_W 32 RSP_W 16 DAT_W 64 SNP_W 24 DEPTH 4
 else ifeq ($(FLOW_VARIANT),medium)
 export VERILOG_TOP_PARAMS     = DEPTH 4
 endif
+export SETUP_REPAIR_PHASES = PARALLEL_EVAL

flow/designs/asap7/ethmac_lvt/config.mk

@@ -17,3 +17,4 @@ export ASAP7_USE_VT           = LVT
 
 export RECOVER_POWER          = 1
 
+export SETUP_REPAIR_PHASES = PARALLEL_EVAL

flow/designs/asap7/gcd/config.mk

@@ -18,3 +18,4 @@ export GPL_PLACE_IOS          = 1
 export SKIP_LAST_GASP ?= 1
 
 export SYNTH_USE_SYN = 1
+export SETUP_REPAIR_PHASES = PARALLEL_EVAL

flow/designs/asap7/ibex/config.mk

@@ -27,6 +27,7 @@ export PLACE_DENSITY_LB_ADDON  = 0.20
 export ENABLE_DPO = 0
 
 export TNS_END_PERCENT        = 100
+export SETUP_REPAIR_PHASES = PARALLEL_EVAL
 
 export SWAP_ARITH_OPERATORS = 1
 export OPENROAD_HIERARCHICAL = 1

flow/designs/asap7/jpeg/config.mk

@@ -14,6 +14,7 @@ export CORE_MARGIN            = 2
 export PLACE_DENSITY          = 0.75
 
 export TNS_END_PERCENT        = 100
+export SETUP_REPAIR_PHASES = PARALLEL_EVAL
 export GPL_PLACE_IOS          = 1
 
 export SYNTH_USE_SYN = 1

flow/designs/asap7/riscv32i/config.mk

@@ -23,6 +23,7 @@ export IO_CONSTRAINTS     = $(DESIGN_HOME)/$(PLATFORM)/$(DESIGN_NICKNAME)/io.tcl
 export RTLMP_MIN_CHANNEL_SIZE = 8 8
 
 export TNS_END_PERCENT   = 100
+export SETUP_REPAIR_PHASES = PARALLEL_EVAL
 
 export CTS_CLUSTER_SIZE = 10
 export CTS_CLUSTER_DIAMETER = 50

flow/designs/asap7/uart/config.mk

@@ -14,6 +14,7 @@ export GPL_PLACE_IOS          = 1
 export DIE_AREA               = 0 0 17 17
 export CORE_AREA              = 1.08 1.08 16 16
 export TNS_END_PERCENT        = 100
+export SETUP_REPAIR_PHASES = PARALLEL_EVAL
 export SKIP_GATE_CLONING      = 1
 export VERILOG_TOP_PARAMS     = DATA_WIDTH 8
 export SYNTH_HDL_FRONTEND     = slang

flow/designs/gf12/aes/config.mk

@@ -20,3 +20,4 @@ endif
 
 export SWAP_ARITH_OPERATORS = 1
 export OPENROAD_HIERARCHICAL = 1
+export SETUP_REPAIR_PHASES = PARALLEL_EVAL

flow/designs/gf12/ibex/config.mk

@@ -23,3 +23,4 @@ export DESIGN_TYPE = CELL
 else
 export DESIGN_TYPE = CELL_NODEN
 endif
+export SETUP_REPAIR_PHASES = PARALLEL_EVAL

flow/designs/gf12/tinyRocket/config.mk

@@ -39,3 +39,4 @@ endif
 
 export SWAP_ARITH_OPERATORS = 1
 export OPENROAD_HIERARCHICAL = 1
+export SETUP_REPAIR_PHASES = PARALLEL_EVAL

flow/designs/gf180/aes-hybrid/config.mk

@@ -42,3 +42,4 @@ export DESIGN_TYPE = CELL
 else
 export DESIGN_TYPE = CELL_NODEN
 endif
+export SETUP_REPAIR_PHASES = PARALLEL_EVAL

flow/designs/gf180/ibex/config.mk

@@ -18,3 +18,4 @@ export PLACE_DENSITY_LB_ADDON = 0.1
 export SWAP_ARITH_OPERATORS = 1
 export OPENROAD_HIERARCHICAL = 1
 
+export SETUP_REPAIR_PHASES = PARALLEL_EVAL

flow/designs/gf180/riscv32i/config.mk

@@ -8,6 +8,7 @@ export SDC_FILE      = $(DESIGN_HOME)/$(PLATFORM)/$(DESIGN_NICKNAME)/constraint.
 export CORE_UTILIZATION = 55
 export PLACE_DENSITY_LB_ADDON = 0.2
 export TNS_END_PERCENT = 100
+export SETUP_REPAIR_PHASES = PARALLEL_EVAL
 export SKIP_GATE_CLONING  = 1
 export PLACE_PINS_ARGS    = -min_distance 5
 export IO_CONSTRAINTS     = $(DESIGN_HOME)/$(PLATFORM)/$(DESIGN_NICKNAME)/io.tcl

flow/designs/ihp-sg13g2/gcd/config.mk

@@ -9,6 +9,7 @@ export USE_FILL = 1
 export PLACE_DENSITY ?= 0.88
 export CORE_UTILIZATION = 20
 export TNS_END_PERCENT = 100
+export SETUP_REPAIR_PHASES = PARALLEL_EVAL
 
 export SWAP_ARITH_OPERATORS = 1
 export OPENROAD_HIERARCHICAL = 1

flow/designs/ihp-sg13g2/ibex/config.mk

@@ -18,6 +18,7 @@ export ADDER_MAP_FILE :=
 export CORE_UTILIZATION = 70
 export PLACE_DENSITY_LB_ADDON = 0.2
 export TNS_END_PERCENT = 100
+export SETUP_REPAIR_PHASES = PARALLEL_EVAL
 export CTS_BUF_DISTANCE = 60
 
 export SWAP_ARITH_OPERATORS = 1

flow/designs/ihp-sg13g2/riscv32i/config.mk

@@ -10,6 +10,7 @@ export USE_FILL = 1
 export CORE_UTILIZATION = 60
 export PLACE_DENSITY_LB_ADDON = 0.2
 export TNS_END_PERCENT = 100
+export SETUP_REPAIR_PHASES = PARALLEL_EVAL
 export CTS_BUF_DISTANCE = 60
 
 export SWAP_ARITH_OPERATORS = 1

flow/designs/nangate45/aes/config.mk

@@ -9,6 +9,7 @@ export FLOORPLAN_DEF = $(DESIGN_HOME)/$(PLATFORM)/$(DESIGN_NICKNAME)/aes_ng45_fp
 
 export PLACE_DENSITY_LB_ADDON = 0.20
 export TNS_END_PERCENT        = 100
+export SETUP_REPAIR_PHASES = PARALLEL_EVAL
 # workaround for high congestion in post-grt repair
 export SKIP_INCREMENTAL_REPAIR = 1
 

flow/designs/nangate45/ariane133/config.mk

@@ -29,3 +29,4 @@ export RTLMP_MAX_INST = 80000
 export RTLMP_MIN_INST = 8000
 
 export GPL_RANDOM_SEED = 3
+export SETUP_REPAIR_PHASES = PARALLEL_EVAL

flow/designs/nangate45/bp_be_top/config.mk

@@ -24,6 +24,7 @@ export RTLMP_MIN_CHANNEL_SIZE = 20 20
 
 export PLACE_DENSITY_LB_ADDON = 0.10
 export TNS_END_PERCENT        = 100
+export SETUP_REPAIR_PHASES = PARALLEL_EVAL
 
 export CTS_CLUSTER_SIZE = 30
 export CTS_CLUSTER_DIAMETER = 50

flow/designs/nangate45/bp_multi_top/config.mk

@@ -36,3 +36,4 @@ export SKIP_GATE_CLONING      = 1
 export SWAP_ARITH_OPERATORS = 1
 export OPENROAD_HIERARCHICAL = 1
 
+export SETUP_REPAIR_PHASES = PARALLEL_EVAL

flow/designs/nangate45/cva6/config.mk

@@ -104,3 +104,4 @@ export SYNTH_CANONICALIZE_TCL = $(DESIGN_HOME)/$(PLATFORM)/$(DESIGN_NAME)/canoni
 
 export SWAP_ARITH_OPERATORS = 1
 export OPENROAD_HIERARCHICAL = 1
+export SETUP_REPAIR_PHASES = PARALLEL_EVAL

flow/designs/nangate45/dynamic_node/config.mk

@@ -12,6 +12,7 @@ export CORE_MARGIN = 5
 
 export PLACE_DENSITY_LB_ADDON = 0.20
 export TNS_END_PERCENT = 100
+export SETUP_REPAIR_PHASES = PARALLEL_EVAL
 export GPL_PLACE_IOS = 1
 
 export SWAP_ARITH_OPERATORS = 1

flow/designs/nangate45/ibex/config.mk

@@ -15,5 +15,6 @@ export SDC_FILE      = $(DESIGN_HOME)/$(PLATFORM)/$(DESIGN_NICKNAME)/constraint.
 export CORE_UTILIZATION ?= 50
 export PLACE_DENSITY_LB_ADDON = 0.20
 export TNS_END_PERCENT        = 100
+export SETUP_REPAIR_PHASES = PARALLEL_EVAL
 export GPL_PLACE_IOS          = 1
 

flow/designs/nangate45/tinyRocket/config.mk

@@ -21,3 +21,4 @@ export CORE_UTILIZATION       = 60
 export CORE_ASPECT_RATIO      = 1
 export CORE_MARGIN            = 2
 export PLACE_DENSITY          = 0.75
+export SETUP_REPAIR_PHASES = PARALLEL_EVAL

flow/designs/sky130hd/aes/config.mk

@@ -13,6 +13,7 @@ export CORE_MARGIN = 2
 
 export PLACE_DENSITY_LB_ADDON = 0.2
 export TNS_END_PERCENT = 100
+export SETUP_REPAIR_PHASES = PARALLEL_EVAL
 
 export FASTROUTE_TCL = $(DESIGN_HOME)/$(PLATFORM)/$(DESIGN_NICKNAME)/fastroute.tcl
 

flow/designs/sky130hd/chameleon/config.mk

@@ -48,5 +48,6 @@ export ADDITIONAL_LEFS  = $(DESIGN_DIR)/lef/apb_sys_0.lef \
 export FP_PDN_RAIL_WIDTH  = 0.48
 export FP_PDN_RAIL_OFFSET = 0
 export TNS_END_PERCENT    = 100
+export SETUP_REPAIR_PHASES = PARALLEL_EVAL
 
 export RTLMP_MIN_CHANNEL_SIZE = 70 70

flow/designs/sky130hd/gcd/config.mk

@@ -9,5 +9,6 @@ export ADDER_MAP_FILE :=
 
 export CORE_UTILIZATION = 38
 export TNS_END_PERCENT = 100
+export SETUP_REPAIR_PHASES = PARALLEL_EVAL
 export SWAP_ARITH_OPERATORS = 1
 export OPENROAD_HIERARCHICAL = 1

flow/designs/sky130hd/ibex/config.mk

@@ -18,6 +18,7 @@ export ADDER_MAP_FILE :=
 export CORE_UTILIZATION = 50
 export PLACE_DENSITY_LB_ADDON = 0.25
 export TNS_END_PERCENT = 100
+export SETUP_REPAIR_PHASES = PARALLEL_EVAL
 
 export FASTROUTE_TCL = $(DESIGN_HOME)/$(PLATFORM)/$(DESIGN_NICKNAME)/fastroute.tcl
 

flow/designs/sky130hd/jpeg/config.mk

@@ -9,5 +9,6 @@ export SDC_FILE      = $(DESIGN_HOME)/$(PLATFORM)/$(DESIGN_NICKNAME)/constraint.
 export CORE_UTILIZATION = 50
 export PLACE_DENSITY_LB_ADDON = 0.15
 export TNS_END_PERCENT = 100
+export SETUP_REPAIR_PHASES = PARALLEL_EVAL
 
 export FASTROUTE_TCL = $(DESIGN_HOME)/$(PLATFORM)/$(DESIGN_NICKNAME)/fastroute.tcl

flow/designs/sky130hd/riscv32i/config.mk

@@ -11,3 +11,4 @@ export PLACE_DENSITY_LB_ADDON = 0.2
 #export SWAP_ARITH_OPERATORS = 1
 #export OPENROAD_HIERARCHICAL = 1
 
+export SETUP_REPAIR_PHASES = PARALLEL_EVAL

flow/designs/sky130hs/aes/config.mk

@@ -11,6 +11,7 @@ export CORE_MARGIN = 2
 
 export PLACE_DENSITY_LB_ADDON = 0.25
 export TNS_END_PERCENT = 100
+export SETUP_REPAIR_PHASES = PARALLEL_EVAL
 export GPL_PLACE_IOS = 1
 
 export CTS_CLUSTER_SIZE = 10

flow/designs/sky130hs/ibex/config.mk

@@ -15,5 +15,6 @@ export SDC_FILE      = $(DESIGN_HOME)/$(PLATFORM)/$(DESIGN_NICKNAME)/constraint.
 export CORE_UTILIZATION = 60
 export PLACE_DENSITY_LB_ADDON = 0.20
 export TNS_END_PERCENT = 100
+export SETUP_REPAIR_PHASES = PARALLEL_EVAL
 export GPL_PLACE_IOS = 1
 

flow/designs/sky130hs/jpeg/config.mk

@@ -13,6 +13,7 @@ export CORE_MARGIN = 2
 
 export PLACE_DENSITY_LB_ADDON = 0.25
 export TNS_END_PERCENT = 100
+export SETUP_REPAIR_PHASES = PARALLEL_EVAL
 
 export CTS_CLUSTER_SIZE = 30
 export CTS_CLUSTER_DIAMETER = 50

flow/designs/sky130hs/riscv32i/config.mk

@@ -10,6 +10,7 @@ export PLACE_DENSITY_LB_ADDON = 0.1
 # many east pins cause global routing congestion
 export PLACE_PINS_ARGS=-min_distance 6 -min_distance_in_tracks
 export TNS_END_PERCENT = 100
+export SETUP_REPAIR_PHASES = PARALLEL_EVAL
 
 export FASTROUTE_TCL = $(DESIGN_HOME)/$(PLATFORM)/$(DESIGN_NICKNAME)/fastroute.tcl
 

flow/scripts/util.tcl

@@ -32,6 +32,7 @@ proc repair_timing_helper { args } {
   append_env_var additional_args SETUP_SLACK_MARGIN -setup_margin 1
   append_env_var additional_args HOLD_SLACK_MARGIN -hold_margin 1
   append_env_var additional_args SETUP_MOVE_SEQUENCE -sequence 1
+  append_env_var additional_args SETUP_REPAIR_PHASES -phases 1
   append_env_var additional_args TNS_END_PERCENT -repair_tns 1
   append_env_var additional_args SKIP_PIN_SWAP -skip_pin_swap 0
   append_env_var additional_args SKIP_GATE_CLONING -skip_gate_cloning 0

flow/scripts/variables.yaml

@@ -858,6 +858,17 @@ SETUP_MOVE_SEQUENCE:
     - cts
     - floorplan
     - grt
+SETUP_REPAIR_PHASES:
+  description: >
+    Passed as -phases to repair_timing. This should be a string of setup
+    repair phase names separated by spaces. Set to PARALLEL_EVAL to repair
+    setup timing with the experimental parallel evaluation policy. When
+    unset, repair_timing runs its default phases.
+  stages:
+    - cts
+    - floorplan
+    - grt
+    - place
 SKIP_GATE_CLONING:
   description: >
     Do not use gate cloning transform to fix timing violations (default: use