WWSTCERT-8045 - Aeotec Home Energy Meter Gen8 (Revert + fixes)

drivers/SmartThings/zwave-electric-meter/fingerprints.yml

@@ -35,6 +35,22 @@ zwaveManufacturer:
     productType: 0x0002
     productId: 0x0001
     deviceProfileName: base-electric-meter
+  - id: "0x0371/0x0003/0x0033" #HEM Gen8 1 Phase EU, AU
+    deviceLabel: Aeotec Home Energy Meter Gen8 Consumption
+    manufacturerId: 0x0371
+    productId: 0x0033
+    deviceProfileName: aeotec-home-energy-meter-gen8-1-phase-con
+  - id: "0x0371/0x0003/0x0034" # HEM Gen8 3 Phase EU, AU
+    deviceLabel: Aeotec Home Energy Meter Gen8 Consumption
+    manufacturerId: 0x0371
+    productId: 0x0034
+    deviceProfileName: aeotec-home-energy-meter-gen8-3-phase-con
+  - id: "0x0371/0x0103/0x002E" # HEM Gen8 2 Phase US
+    deviceLabel: Aeotec Home Energy Meter Gen8 Consumption
+    manufacturerId: 0x0371
+    productType: 0x0103
+    productId: 0x002E
+    deviceProfileName: aeotec-home-energy-meter-gen8-2-phase-con
 zwaveGeneric:
   - id: "GenericEnergyMeter"
     deviceLabel: Energy Monitor

drivers/SmartThings/zwave-electric-meter/profiles/aeotec-home-energy-meter-gen8-1-phase-con.yml

@@ -0,0 +1,107 @@
+name: aeotec-home-energy-meter-gen8-1-phase-con
+components:
+- id: main
+  label: "Sum Consumption"
+  capabilities:
+  - id: powerMeter
+    version: 1
+  - id: energyMeter
+    version: 1
+  - id: powerConsumptionReport
+    version: 1
+  - id: refresh
+    version: 1
+  categories:
+  - name: PowerMeasurementSensor
+- id: clamp1
+  label: "Clamp 1"
+  capabilities:
+  - id: powerMeter
+    version: 1
+  - id: energyMeter
+    version: 1
+  categories:
+  - name: PowerMeasurementSensor
+preferences:
+  - name: thresholdCheck
+    title: "3. Threshold Check Enable/Disable"
+    description: "Enable selective reporting only when power change reaches a certain threshold or percentage set in 4 -19 below. This is used to reduce network traffic."
+    preferenceType: enumeration
+    definition:
+      options:
+        0: "Disable"
+        1: "Enable"
+      default: 1
+  - name: imWThresholdTotal
+    title: "4. Import W threshold (total)"
+    description: "Threshold change in import wattage to induce an automatic report (Whole HEM)."
+    preferenceType: integer
+    definition:
+      minimum: 0
+      maximum: 60000
+      default: 50
+  - name: imWThresholdPhaseA
+    title: "5. Import W threshold (Phase A)"
+    description: "Threshold change in import wattage to induce an automatic report (Phase A)."
+    preferenceType: integer
+    definition:
+      minimum: 0
+      maximum: 60000
+      default: 50
+  - name: exWThresholdTotal
+    title: "8. Export W threshold (total)"
+    description: "Threshold change in export wattage to induce an automatic report (Whole HEM)."
+    preferenceType: integer
+    definition:
+      minimum: 0
+      maximum: 60000
+      default: 50
+  - name: exWThresholdPhaseA
+    title: "9. Export W threshold (Phase A)"
+    description: "Threshold change in export wattage to induce an automatic report (Phase A)."
+    preferenceType: integer
+    definition:
+      minimum: 0
+      maximum: 60000
+      default: 50
+  - name: imWPctThresholdTotal
+    title: "12. Import W threshold (total)"
+    description: "Percentage change in import wattage to induce an automatic report (Whole HEM)."
+    preferenceType: integer
+    definition:
+      minimum: 0
+      maximum: 100
+      default: 20
+  - name: imWPctThresholdPhaseA
+    title: "13. Import W threshold (Phase A)"
+    description: "Percentage change in import wattage to induce an automatic report (Phase A)."
+    preferenceType: integer
+    definition:
+      minimum: 0
+      maximum: 100
+      default: 20
+  - name: exWPctThresholdTotal
+    title: "16. Export W threshold (total)"
+    description: "Percentage change in export wattage to induce an automatic report (Whole HEM)."
+    preferenceType: integer
+    definition:
+      minimum: 0
+      maximum: 100
+      default: 20
+  - name: exWPctThresholdPhaseA
+    title: "17. Export W threshold (Phase A)"
+    description: "Percentage change in export wattage to induce an automatic report (Phase A)."
+    preferenceType: integer
+    definition:
+      minimum: 0
+      maximum: 100
+      default: 20
+  - name: autoRootDeviceReport
+    title: "32. Auto report of root device"
+    description: "Enable automatic report of root device."
+    preferenceType: enumeration
+    definition:
+      options:
+        0: "Disable"
+        1: "Enable"
+      default: 0

drivers/SmartThings/zwave-electric-meter/profiles/aeotec-home-energy-meter-gen8-1-phase-pro.yml

@@ -0,0 +1,22 @@
+name: aeotec-home-energy-meter-gen8-1-phase-pro
+components:
+- id: main
+  label: "Sum Production"
+  capabilities:
+  - id: powerMeter
+    version: 1
+  - id: energyMeter
+    version: 1
+  - id: refresh
+    version: 1
+  categories:
+  - name: PowerMeasurementSensor
+- id: clamp2
+  label: "Clamp 1"
+  capabilities:
+  - id: powerMeter
+    version: 1
+  - id: energyMeter
+    version: 1
+  categories:
+  - name: PowerMeasurementSensor

drivers/SmartThings/zwave-electric-meter/profiles/aeotec-home-energy-meter-gen8-2-phase-con.yml

@@ -0,0 +1,148 @@
+name: aeotec-home-energy-meter-gen8-2-phase-con
+components:
+- id: main
+  label: "Sum Consumption"
+  capabilities:
+  - id: powerMeter
+    version: 1
+  - id: energyMeter
+    version: 1
+  - id: powerConsumptionReport
+    version: 1
+  - id: refresh
+    version: 1
+  categories:
+  - name: PowerMeasurementSensor
+- id: clamp1
+  label: "Clamp 1"
+  capabilities:
+  - id: powerMeter
+    version: 1
+  - id: energyMeter
+    version: 1
+  categories:
+  - name: PowerMeasurementSensor
+- id: clamp3
+  label: "Clamp 2"
+  capabilities:
+  - id: powerMeter
+    version: 1
+  - id: energyMeter
+    version: 1
+  categories:
+  - name: PowerMeasurementSensor
+preferences:
+  - name: thresholdCheck
+    title: "3. Threshold Check Enable/Disable"
+    description: "Enable selective reporting only when power change reaches a certain threshold or percentage set in 4 -19 below. This is used to reduce network traffic."
+    preferenceType: enumeration
+    definition:
+      options:
+        0: "Disable"
+        1: "Enable"
+      default: 1
+  - name: imWThresholdTotal
+    title: "4. Import W threshold (total)"
+    description: "Threshold change in import wattage to induce an automatic report (Whole HEM)."
+    preferenceType: integer
+    definition:
+      minimum: 0
+      maximum: 60000
+      default: 50
+  - name: imWThresholdPhaseA
+    title: "5. Import W threshold (Phase A)"
+    description: "Threshold change in import wattage to induce an automatic report (Phase A)."
+    preferenceType: integer
+    definition:
+      minimum: 0
+      maximum: 60000
+      default: 50
+  - name: imWhresholdPhaseB
+    title: "6. Import W threshold (Phase B)"
+    description: "Threshold change in import wattage to induce an automatic report (Phase B)."
+    preferenceType: integer
+    definition:
+      minimum: 0
+      maximum: 60000
+      default: 50
+  - name: exWhresholdTotal
+    title: "8. Export W threshold (total)"
+    description: "Threshold change in export wattage to induce an automatic report (Whole HEM)."
+    preferenceType: integer
+    definition:
+      minimum: 0
+      maximum: 60000
+      default: 50
+  - name: exWThresholdPhaseA
+    title: "9. Export W threshold (Phase A)"
+    description: "Threshold change in export wattage to induce an automatic report (Phase A)."
+    preferenceType: integer
+    definition:
+      minimum: 0
+      maximum: 60000
+      default: 50
+  - name: exWThresholdPhaseB
+    title: "10. Export W threshold (Phase B)"
+    description: "Threshold change in export wattage to induce an automatic report (Phase B)."
+    preferenceType: integer
+    definition:
+      minimum: 0
+      maximum: 60000
+      default: 50
+  - name: imWPctThresholdTotal
+    title: "12. Import W threshold (total)"
+    description: "Percentage change in import wattage to induce an automatic report (Whole HEM)."
+    preferenceType: integer
+    definition:
+      minimum: 0
+      maximum: 100
+      default: 20
+  - name: imWPctThresholdPhaseA
+    title: "13. Import W threshold (Phase A)"
+    description: "Percentage change in import wattage to induce an automatic report (Phase A)."
+    preferenceType: integer
+    definition:
+      minimum: 0
+      maximum: 100
+      default: 20
+  - name: imWPctThresholdPhaseB
+    title: "14. Import W threshold (Phase B)."
+    description: "Percentage change in import wattage to induce an automatic report (Phase B)."
+    preferenceType: integer
+    definition:
+      minimum: 0
+      maximum: 100
+      default: 20
+  - name: exWPctThresholdTotal
+    title: "16. Export W threshold (total)"
+    description: "Percentage change in export wattage to induce an automatic report (Whole HEM)."
+    preferenceType: integer
+    definition:
+      minimum: 0
+      maximum: 100
+      default: 20
+  - name: exWPctThresholdPhaseA
+    title: "17. Export W threshold (Phase A)"
+    description: "Percentage change in export wattage to induce an automatic report (Phase A)."
+    preferenceType: integer
+    definition:
+      minimum: 0
+      maximum: 100
+      default: 20
+  - name: exWPctThresholdPhaseB
+    title: "18. Export W threshold (Phase B)"
+    description: "Percentage change in export wattage to induce an automatic report (Phase B)."
+    preferenceType: integer
+    definition:
+      minimum: 0
+      maximum: 100
+      default: 20
+  - name: autoRootDeviceReport
+    title: "32. Auto report of root device"
+    description: "Enable automatic report of root device."
+    preferenceType: enumeration
+    definition:
+      options:
+        0: "Disable"
+        1: "Enable"
+      default: 0

drivers/SmartThings/zwave-electric-meter/profiles/aeotec-home-energy-meter-gen8-2-phase-pro.yml

@@ -0,0 +1,31 @@
+name: aeotec-home-energy-meter-gen8-2-phase-pro
+components:
+- id: main
+  label: "Sum Production"
+  capabilities:
+  - id: powerMeter
+    version: 1
+  - id: energyMeter
+    version: 1
+  - id: refresh
+    version: 1
+  categories:
+  - name: PowerMeasurementSensor
+- id: clamp2
+  label: "Clamp 1"
+  capabilities:
+  - id: powerMeter
+    version: 1
+  - id: energyMeter
+    version: 1
+  categories:
+  - name: PowerMeasurementSensor
+- id: clamp4
+  label: "Clamp 2"
+  capabilities:
+  - id: powerMeter
+    version: 1
+  - id: energyMeter
+    version: 1
+  categories:
+  - name: PowerMeasurementSensor