diff --git a/Modelica/Electrical/PowerConverters/Examples/ACAC/Dimmer_R.mo b/Modelica/Electrical/PowerConverters/Examples/ACAC/Dimmer_R.mo
index e7a96937dd..eed576b310 100644
--- a/Modelica/Electrical/PowerConverters/Examples/ACAC/Dimmer_R.mo
+++ b/Modelica/Electrical/PowerConverters/Examples/ACAC/Dimmer_R.mo
@@ -14,7 +14,7 @@ equation
annotation (Line(points={{50,20},{50,40},{30,40}}, color={0,0,255}));
annotation (experiment(
StopTime=8,
- Interval=0.0001,
+ Interval=0.0002,
Tolerance=1e-06),
Documentation(info="
diff --git a/Modelica/Electrical/PowerConverters/Examples/ACAC/Dimmer_RL.mo b/Modelica/Electrical/PowerConverters/Examples/ACAC/Dimmer_RL.mo
index 2cdc0da507..5d61cfb21f 100644
--- a/Modelica/Electrical/PowerConverters/Examples/ACAC/Dimmer_RL.mo
+++ b/Modelica/Electrical/PowerConverters/Examples/ACAC/Dimmer_RL.mo
@@ -22,7 +22,7 @@ equation
annotation (Line(points={{50,0},{50,20}}, color={0,0,255}));
annotation (experiment(
StopTime=8,
- Interval=0.0001,
+ Interval=0.0002,
Tolerance=1e-06),
Documentation(info="
diff --git a/Modelica/Electrical/PowerConverters/Examples/ACAC/SoftStarter.mo b/Modelica/Electrical/PowerConverters/Examples/ACAC/SoftStarter.mo
index aa2f6c7b22..471a8bc69b 100644
--- a/Modelica/Electrical/PowerConverters/Examples/ACAC/SoftStarter.mo
+++ b/Modelica/Electrical/PowerConverters/Examples/ACAC/SoftStarter.mo
@@ -194,7 +194,7 @@ equation
annotation (Line(points={{-11,-60},{-18,-60}}, color={255,0,255}));
annotation (experiment(
StopTime=10,
- Interval=0.0001,
+ Interval=0.0002,
Tolerance=1e-06), Documentation(info="
This model demonstrates a soft start of an induction machine:
Voltage ramp is started at 0.1 s and should ramp up to nominal voltage within 4s,
diff --git a/Modelica/Resources/Reference/Modelica/Electrical/PowerConverters/Examples/ACAC/Dimmer_R/comparisonSignals.txt b/Modelica/Resources/Reference/Modelica/Electrical/PowerConverters/Examples/ACAC/Dimmer_R/comparisonSignals.txt
index 12f254543d..c578babb33 100644
--- a/Modelica/Resources/Reference/Modelica/Electrical/PowerConverters/Examples/ACAC/Dimmer_R/comparisonSignals.txt
+++ b/Modelica/Resources/Reference/Modelica/Electrical/PowerConverters/Examples/ACAC/Dimmer_R/comparisonSignals.txt
@@ -1,12 +1,3 @@
time
-voltageSensor.v
-multiSensor.i
-multiSensor.v
-multiSensor.power
-meanPower.y
vRMS.y
-vH01.y_rms
-vH01.y_arg
iRMS.y
-iH01.y_rms
-iH01.y_arg
diff --git a/Modelica/Resources/Reference/Modelica/Electrical/PowerConverters/Examples/ACAC/Dimmer_RL/comparisonSignals.txt b/Modelica/Resources/Reference/Modelica/Electrical/PowerConverters/Examples/ACAC/Dimmer_RL/comparisonSignals.txt
index 12f254543d..c578babb33 100644
--- a/Modelica/Resources/Reference/Modelica/Electrical/PowerConverters/Examples/ACAC/Dimmer_RL/comparisonSignals.txt
+++ b/Modelica/Resources/Reference/Modelica/Electrical/PowerConverters/Examples/ACAC/Dimmer_RL/comparisonSignals.txt
@@ -1,12 +1,3 @@
time
-voltageSensor.v
-multiSensor.i
-multiSensor.v
-multiSensor.power
-meanPower.y
vRMS.y
-vH01.y_rms
-vH01.y_arg
iRMS.y
-iH01.y_rms
-iH01.y_arg
diff --git a/Modelica/Resources/Reference/Modelica/Electrical/PowerConverters/Examples/ACAC/SoftStarter/comparisonSignals.txt b/Modelica/Resources/Reference/Modelica/Electrical/PowerConverters/Examples/ACAC/SoftStarter/comparisonSignals.txt
index 13718d19c9..588d2245ec 100644
--- a/Modelica/Resources/Reference/Modelica/Electrical/PowerConverters/Examples/ACAC/SoftStarter/comparisonSignals.txt
+++ b/Modelica/Resources/Reference/Modelica/Electrical/PowerConverters/Examples/ACAC/SoftStarter/comparisonSignals.txt
@@ -1,29 +1,3 @@
time
-currentQuasiRMSSensor.i[1]
-currentQuasiRMSSensor.i[2]
-currentQuasiRMSSensor.i[3]
-voltageSensor.v[1]
-voltageSensor.v[2]
-voltageSensor.v[3]
-multiSensor.i[1]
-multiSensor.i[2]
-multiSensor.i[3]
-multiSensor.v[1]
-multiSensor.v[2]
-multiSensor.v[3]
-multiSensor.power[1]
-multiSensor.power[2]
-multiSensor.power[3]
-multiSensor.powerTotal
-rootMeanSquare.y
-rootMeanSquare.mean.x
-harmonic.mean1.x
-harmonic.mean2.x
-// imc.rotorCage.electroMagneticConverter.singlePhaseElectroMagneticConverter[1].Phi.re
-// imc.rotorCage.electroMagneticConverter.singlePhaseElectroMagneticConverter[2].Phi.im
-// imc.stator.electroMagneticConverter.singlePhaseElectroMagneticConverter[1].Phi.re
-// imc.stator.electroMagneticConverter.singlePhaseElectroMagneticConverter[2].Phi.im
-// imc.stator.zeroInductor.i0
-loadInertia.phi
+harmonic.y_rms
loadInertia.w
-softStartControl.vRef
diff --git a/Modelica/Resources/Reference/Modelica/Electrical/PowerConverters/Examples/ACDC/Rectifier1Pulse/Thyristor1Pulse_R_Characteristic/comparisonSignals.txt b/Modelica/Resources/Reference/Modelica/Electrical/PowerConverters/Examples/ACDC/Rectifier1Pulse/Thyristor1Pulse_R_Characteristic/comparisonSignals.txt
index 2f1ee01b34..1681b817ca 100644
--- a/Modelica/Resources/Reference/Modelica/Electrical/PowerConverters/Examples/ACDC/Rectifier1Pulse/Thyristor1Pulse_R_Characteristic/comparisonSignals.txt
+++ b/Modelica/Resources/Reference/Modelica/Electrical/PowerConverters/Examples/ACDC/Rectifier1Pulse/Thyristor1Pulse_R_Characteristic/comparisonSignals.txt
@@ -1,10 +1,3 @@
time
-meanCurrent.x
-meanVoltage.x
-rootMeanSquareVoltage.mean.x
-idealthyristor.off
meanCurrent.y
meanVoltage.y
-pulse2.twoPulse.timerNegative[1].entryTime
-pulse2.twoPulse.timerPositive[1].entryTime
-rootMeanSquareVoltage.mean.y
diff --git a/Modelica/Resources/Reference/Modelica/Electrical/PowerConverters/Examples/ACDC/RectifierBridge2Pulse/ThyristorBridge2Pulse_DC_Drive/comparisonSignals.txt b/Modelica/Resources/Reference/Modelica/Electrical/PowerConverters/Examples/ACDC/RectifierBridge2Pulse/ThyristorBridge2Pulse_DC_Drive/comparisonSignals.txt
index ceec488536..1681b817ca 100644
--- a/Modelica/Resources/Reference/Modelica/Electrical/PowerConverters/Examples/ACDC/RectifierBridge2Pulse/ThyristorBridge2Pulse_DC_Drive/comparisonSignals.txt
+++ b/Modelica/Resources/Reference/Modelica/Electrical/PowerConverters/Examples/ACDC/RectifierBridge2Pulse/ThyristorBridge2Pulse_DC_Drive/comparisonSignals.txt
@@ -1,20 +1,3 @@
time
-dcpm.inertiaRotor.phi
-dcpm.inertiaRotor.w
-inductor.i
-lMains.i
-meanCurrent.x
-meanVoltage.x
-pulse2.twoPulse.filter[1].firstOrder.y
-pulse2.twoPulse.filter[1].transferFunction[1].x_scaled[1]
-pulse2.twoPulse.filter[1].transferFunction[2].x_scaled[1]
-rootMeanSquareVoltage.mean.x
meanCurrent.y
meanVoltage.y
-pulse2.twoPulse.timerNegative[1].entryTime
-pulse2.twoPulse.timerPositive[1].entryTime
-rectifier.thyristor_n1.off
-rectifier.thyristor_n2.off
-rectifier.thyristor_p1.off
-rectifier.thyristor_p2.off
-rootMeanSquareVoltage.mean.y
diff --git a/Modelica/Resources/Reference/Modelica/Electrical/PowerConverters/Examples/ACDC/RectifierBridge2Pulse/ThyristorBridge2Pulse_RLV_Characteristic/comparisonSignals.txt b/Modelica/Resources/Reference/Modelica/Electrical/PowerConverters/Examples/ACDC/RectifierBridge2Pulse/ThyristorBridge2Pulse_RLV_Characteristic/comparisonSignals.txt
index 9344940d39..1681b817ca 100644
--- a/Modelica/Resources/Reference/Modelica/Electrical/PowerConverters/Examples/ACDC/RectifierBridge2Pulse/ThyristorBridge2Pulse_RLV_Characteristic/comparisonSignals.txt
+++ b/Modelica/Resources/Reference/Modelica/Electrical/PowerConverters/Examples/ACDC/RectifierBridge2Pulse/ThyristorBridge2Pulse_RLV_Characteristic/comparisonSignals.txt
@@ -1,14 +1,3 @@
time
-inductor.i
-meanCurrent.x
-meanVoltage.x
-rootMeanSquareVoltage.mean.x
meanCurrent.y
meanVoltage.y
-pulse2.twoPulse.timerNegative[1].entryTime
-pulse2.twoPulse.timerPositive[1].entryTime
-rectifier.thyristor_n1.off
-rectifier.thyristor_n2.off
-rectifier.thyristor_p1.off
-rectifier.thyristor_p2.off
-rootMeanSquareVoltage.mean.y
diff --git a/Modelica/Resources/Reference/Modelica/Electrical/PowerConverters/Examples/ACDC/RectifierBridge2mPulse/ThyristorBridge2mPulse_DC_Drive/comparisonSignals.txt b/Modelica/Resources/Reference/Modelica/Electrical/PowerConverters/Examples/ACDC/RectifierBridge2mPulse/ThyristorBridge2mPulse_DC_Drive/comparisonSignals.txt
index 54d4a5d58b..1681b817ca 100644
--- a/Modelica/Resources/Reference/Modelica/Electrical/PowerConverters/Examples/ACDC/RectifierBridge2mPulse/ThyristorBridge2mPulse_DC_Drive/comparisonSignals.txt
+++ b/Modelica/Resources/Reference/Modelica/Electrical/PowerConverters/Examples/ACDC/RectifierBridge2mPulse/ThyristorBridge2mPulse_DC_Drive/comparisonSignals.txt
@@ -1,39 +1,3 @@
time
-dcpm.inertiaRotor.phi
-dcpm.inertiaRotor.w
-inductor.i
-lMains.inductor[2].i
-lMains.inductor[3].i
-meanCurrent.x
-meanVoltage.x
-pulse2.twomPulse.filter[1].firstOrder.y
-pulse2.twomPulse.filter[1].transferFunction[1].x_scaled[1]
-pulse2.twomPulse.filter[1].transferFunction[2].x_scaled[1]
-pulse2.twomPulse.filter[2].firstOrder.y
-pulse2.twomPulse.filter[2].transferFunction[1].x_scaled[1]
-pulse2.twomPulse.filter[2].transferFunction[2].x_scaled[1]
-pulse2.twomPulse.filter[3].firstOrder.y
-pulse2.twomPulse.filter[3].transferFunction[1].x_scaled[1]
-pulse2.twomPulse.filter[3].transferFunction[2].x_scaled[1]
-rootMeanSquareVoltage.mean.x
meanCurrent.y
meanVoltage.y
-pulse2.twomPulse.timerNegative[1].entryTime
-pulse2.twomPulse.timerNegative[2].entryTime
-pulse2.twomPulse.timerNegative[3].entryTime
-pulse2.twomPulse.timerPositive[1].entryTime
-pulse2.twomPulse.timerPositive[2].entryTime
-pulse2.twomPulse.timerPositive[3].entryTime
-rectifier.pre_n[1].u
-rectifier.pre_n[2].u
-rectifier.pre_n[3].u
-rectifier.pre_p[1].u
-rectifier.pre_p[2].u
-rectifier.pre_p[3].u
-rectifier.thyristor_n.idealThyristor[1].off
-rectifier.thyristor_n.idealThyristor[2].off
-rectifier.thyristor_n.idealThyristor[3].off
-rectifier.thyristor_p.idealThyristor[1].off
-rectifier.thyristor_p.idealThyristor[2].off
-rectifier.thyristor_p.idealThyristor[3].off
-rootMeanSquareVoltage.mean.y
diff --git a/Modelica/Resources/Reference/Modelica/Electrical/PowerConverters/Examples/ACDC/RectifierBridge2mPulse/ThyristorBridge2mPulse_RLV_Characteristic/comparisonSignals.txt b/Modelica/Resources/Reference/Modelica/Electrical/PowerConverters/Examples/ACDC/RectifierBridge2mPulse/ThyristorBridge2mPulse_RLV_Characteristic/comparisonSignals.txt
index 2053507105..1681b817ca 100644
--- a/Modelica/Resources/Reference/Modelica/Electrical/PowerConverters/Examples/ACDC/RectifierBridge2mPulse/ThyristorBridge2mPulse_RLV_Characteristic/comparisonSignals.txt
+++ b/Modelica/Resources/Reference/Modelica/Electrical/PowerConverters/Examples/ACDC/RectifierBridge2mPulse/ThyristorBridge2mPulse_RLV_Characteristic/comparisonSignals.txt
@@ -1,26 +1,3 @@
time
-inductor.i
-meanCurrent.x
-meanVoltage.x
-rootMeanSquareVoltage.mean.x
meanCurrent.y
meanVoltage.y
-pulse2m.twomPulse.timerNegative[1].entryTime
-pulse2m.twomPulse.timerNegative[2].entryTime
-pulse2m.twomPulse.timerNegative[3].entryTime
-pulse2m.twomPulse.timerPositive[1].entryTime
-pulse2m.twomPulse.timerPositive[2].entryTime
-pulse2m.twomPulse.timerPositive[3].entryTime
-rectifier.pre_n[1].u
-rectifier.pre_n[2].u
-rectifier.pre_n[3].u
-rectifier.pre_p[1].u
-rectifier.pre_p[2].u
-rectifier.pre_p[3].u
-rectifier.thyristor_n.idealThyristor[1].off
-rectifier.thyristor_n.idealThyristor[2].off
-rectifier.thyristor_n.idealThyristor[3].off
-rectifier.thyristor_p.idealThyristor[1].off
-rectifier.thyristor_p.idealThyristor[2].off
-rectifier.thyristor_p.idealThyristor[3].off
-rootMeanSquareVoltage.mean.y
diff --git a/Modelica/Resources/Reference/Modelica/Electrical/PowerConverters/Examples/ACDC/RectifierCenterTap2Pulse/ThyristorCenterTap2Pulse_RLV_Characteristic/comparisonSignals.txt b/Modelica/Resources/Reference/Modelica/Electrical/PowerConverters/Examples/ACDC/RectifierCenterTap2Pulse/ThyristorCenterTap2Pulse_RLV_Characteristic/comparisonSignals.txt
index b6d2f7db9f..1681b817ca 100644
--- a/Modelica/Resources/Reference/Modelica/Electrical/PowerConverters/Examples/ACDC/RectifierCenterTap2Pulse/ThyristorCenterTap2Pulse_RLV_Characteristic/comparisonSignals.txt
+++ b/Modelica/Resources/Reference/Modelica/Electrical/PowerConverters/Examples/ACDC/RectifierCenterTap2Pulse/ThyristorCenterTap2Pulse_RLV_Characteristic/comparisonSignals.txt
@@ -1,12 +1,3 @@
time
-inductor.i
-meanCurrent.x
-meanVoltage.x
-rootMeanSquareVoltage.mean.x
meanCurrent.y
meanVoltage.y
-pulse2.twoPulse.timerNegative[1].entryTime
-pulse2.twoPulse.timerPositive[1].entryTime
-rectifier.thyristor_n.off
-rectifier.thyristor_p.off
-rootMeanSquareVoltage.mean.y
diff --git a/Modelica/Resources/Reference/Modelica/Electrical/PowerConverters/Examples/ACDC/RectifierCenterTap2mPulse/ThyristorCenterTap2mPulse_RLV_Characteristic/comparisonSignals.txt b/Modelica/Resources/Reference/Modelica/Electrical/PowerConverters/Examples/ACDC/RectifierCenterTap2mPulse/ThyristorCenterTap2mPulse_RLV_Characteristic/comparisonSignals.txt
index cb69bf2ec0..1681b817ca 100644
--- a/Modelica/Resources/Reference/Modelica/Electrical/PowerConverters/Examples/ACDC/RectifierCenterTap2mPulse/ThyristorCenterTap2mPulse_RLV_Characteristic/comparisonSignals.txt
+++ b/Modelica/Resources/Reference/Modelica/Electrical/PowerConverters/Examples/ACDC/RectifierCenterTap2mPulse/ThyristorCenterTap2mPulse_RLV_Characteristic/comparisonSignals.txt
@@ -1,20 +1,3 @@
time
-inductor.i
-meanCurrent.x
-meanVoltage.x
-rootMeanSquareVoltage.mean.x
meanCurrent.y
meanVoltage.y
-pulse2m.twomPulse.timerNegative[1].entryTime
-pulse2m.twomPulse.timerNegative[2].entryTime
-pulse2m.twomPulse.timerNegative[3].entryTime
-pulse2m.twomPulse.timerPositive[1].entryTime
-pulse2m.twomPulse.timerPositive[2].entryTime
-pulse2m.twomPulse.timerPositive[3].entryTime
-rectifier.thyristor_n.idealThyristor[1].off
-rectifier.thyristor_n.idealThyristor[2].off
-rectifier.thyristor_n.idealThyristor[3].off
-rectifier.thyristor_p.idealThyristor[1].off
-rectifier.thyristor_p.idealThyristor[2].off
-rectifier.thyristor_p.idealThyristor[3].off
-rootMeanSquareVoltage.mean.y
diff --git a/Modelica/Resources/Reference/Modelica/Electrical/PowerConverters/Examples/ACDC/RectifierCenterTapmPulse/ThyristorCenterTapmPulse_RLV_Characteristic/comparisonSignals.txt b/Modelica/Resources/Reference/Modelica/Electrical/PowerConverters/Examples/ACDC/RectifierCenterTapmPulse/ThyristorCenterTapmPulse_RLV_Characteristic/comparisonSignals.txt
index d8b2a856e5..1681b817ca 100644
--- a/Modelica/Resources/Reference/Modelica/Electrical/PowerConverters/Examples/ACDC/RectifierCenterTapmPulse/ThyristorCenterTapmPulse_RLV_Characteristic/comparisonSignals.txt
+++ b/Modelica/Resources/Reference/Modelica/Electrical/PowerConverters/Examples/ACDC/RectifierCenterTapmPulse/ThyristorCenterTapmPulse_RLV_Characteristic/comparisonSignals.txt
@@ -1,17 +1,3 @@
time
-inductor.i
-meanCurrent.x
-meanVoltage.x
-rootMeanSquareVoltage.mean.x
meanCurrent.y
meanVoltage.y
-pulsem.twomPulse.timerNegative[1].entryTime
-pulsem.twomPulse.timerNegative[2].entryTime
-pulsem.twomPulse.timerNegative[3].entryTime
-pulsem.twomPulse.timerPositive[1].entryTime
-pulsem.twomPulse.timerPositive[2].entryTime
-pulsem.twomPulse.timerPositive[3].entryTime
-rectifier.thyristor.idealThyristor[1].off
-rectifier.thyristor.idealThyristor[2].off
-rectifier.thyristor.idealThyristor[3].off
-rootMeanSquareVoltage.mean.y
diff --git a/Modelica/Resources/Reference/Modelica/Electrical/PowerConverters/Examples/DCDC/HBridge/HBridge_DC_Drive/comparisonSignals.txt b/Modelica/Resources/Reference/Modelica/Electrical/PowerConverters/Examples/DCDC/HBridge/HBridge_DC_Drive/comparisonSignals.txt
index 988b6ccff0..1681b817ca 100644
--- a/Modelica/Resources/Reference/Modelica/Electrical/PowerConverters/Examples/DCDC/HBridge/HBridge_DC_Drive/comparisonSignals.txt
+++ b/Modelica/Resources/Reference/Modelica/Electrical/PowerConverters/Examples/DCDC/HBridge/HBridge_DC_Drive/comparisonSignals.txt
@@ -1,10 +1,3 @@
time
-dcpm.inertiaRotor.phi
-dcpm.inertiaRotor.w
-inductor.i
meanCurrent.y
meanVoltage.y
-hbridge.vDC1
-hbridge.iDC1
-hbridge.vDC2
-hbridge.iDC2
diff --git a/ModelicaTest/Electrical/PowerConverters.mo b/ModelicaTest/Electrical/PowerConverters.mo
deleted file mode 100644
index 3f22e6a521..0000000000
--- a/ModelicaTest/Electrical/PowerConverters.mo
+++ /dev/null
@@ -1,254 +0,0 @@
-within ModelicaTest.Electrical;
-package PowerConverters
- extends Modelica.Icons.ExamplesPackage;
- model HalfControlledBridge2mPulse
- "2*m pulse half controlled rectifier bridge with resistive load"
- import Modelica_Electrical_PowerConverters =
- Modelica.Electrical.PowerConverters;
- extends Modelica.Icons.Example;
- import Modelica.Constants.pi;
- parameter Integer m(final min=3) = 3 "Number of phases" annotation(Evaluate=true);
- parameter SI.Voltage Vrms=110 "RMS supply voltage";
- parameter SI.Frequency f=50 "Frequency";
- parameter SI.Angle constantFiringAngle=30*pi/180
- "Firing angle";
- parameter SI.Resistance R=20 "Load resistance";
-
- Modelica.Electrical.Polyphase.Sources.SineVoltage sineVoltage(
- final m=m,
- V=fill(sqrt(2)*Vrms, m),
- phase=-
- Modelica.Electrical.Polyphase.Functions.symmetricOrientation(m),
- f=fill(f, m)) annotation (Placement(transformation(
- extent={{-10,-10},{10,10}},
- rotation=270,
- origin={-80,-30})));
- Modelica_Electrical_PowerConverters.ACDC.HalfControlledBridge2mPulse
- rectifier(final m=m, offStart_p=fill(true, m))
- annotation (Placement(transformation(extent={{-40,24},{-20,44}})));
- Modelica.Electrical.Analog.Sensors.VoltageSensor voltagesensor
- annotation (Placement(transformation(
- origin={50,10},
- extent={{10,-10},{-10,10}},
- rotation=90)));
- Modelica.Blocks.Math.Mean meanVoltage(f=2*m*f) annotation (Placement(
- transformation(
- extent={{-10,-10},{10,10}},
- origin={80,40})));
- Modelica.Blocks.Math.RootMeanSquare rootMeanSquareVoltage(f=2*m*f)
- annotation (Placement(transformation(
- extent={{-10,-10},{10,10}},
- origin={80,10})));
- Modelica.Electrical.Analog.Sensors.CurrentSensor currentSensor
- annotation (Placement(transformation(
- extent={{-10,10},{10,-10}},
- rotation=180,
- origin={0,-40})));
- Modelica.Blocks.Math.Mean meanCurrent(f=2*m*f) annotation (Placement(
- transformation(
- extent={{-10,-10},{10,10}},
- origin={80,-60})));
- Modelica_Electrical_PowerConverters.ACDC.Control.VoltageBridge2mPulse
- pulse2m(
- m=m,
- f=f,
- useFilter=false,
- constantFiringAngle=constantFiringAngle) annotation (Placement(
- transformation(
- extent={{10,10},{-10,-10}},
- rotation=180,
- origin={-30,0})));
- Modelica.Electrical.Polyphase.Basic.MultiStarResistance
- multiStarResistance(final m=m) annotation (Placement(transformation(
- extent={{-10,-10},{10,10}},
- rotation=270,
- origin={-80,-60})));
- Modelica.Electrical.Analog.Basic.Ground ground annotation (Placement(
- transformation(extent={{-90,-100},{-70,-80}})));
- Modelica.Electrical.Analog.Basic.Resistor resistor(R=R) annotation (
- Placement(transformation(
- origin={30,30},
- extent={{10,-10},{-10,10}},
- rotation=90)));
- Modelica.Electrical.Polyphase.Basic.Resistor resistor1(m=m, R=fill(1, m))
- annotation (Placement(transformation(
- extent={{-10,-10},{10,10}},
- rotation=-90,
- origin={-80,-4})));
- equation
- connect(meanCurrent.u, currentSensor.i) annotation (Line(
- points={{68,-60},{0,-60},{0,-50}}, color={0,0,127}));
- connect(voltagesensor.v, meanVoltage.u) annotation (Line(
- points={{60,10},{64,10},{64,40},{68,40}}, color={0,0,127}));
- connect(voltagesensor.v, rootMeanSquareVoltage.u) annotation (Line(
- points={{60,10},{68,10}}, color={0,0,127}));
- connect(rectifier.dc_n, currentSensor.n) annotation (Line(
- points={{-20,28},{-10,28},{-10,-40}}, color={0,0,255}));
- connect(rectifier.dc_p, voltagesensor.p) annotation (Line(
- points={{-20,40},{50,40},{50,20}}, color={0,0,255}));
- connect(currentSensor.p, voltagesensor.n) annotation (Line(
- points={{10,-40},{50,-40},{50,0}}, color={0,0,255}));
- connect(pulse2m.fire_p, rectifier.fire_p) annotation (Line(
- points={{-36,11},{-36,22}}, color={255,0,255}));
- connect(sineVoltage.plug_n, multiStarResistance.plug) annotation (
- Line(
- points={{-80,-40},{-80,-50}}, color={0,0,255}));
- connect(multiStarResistance.pin, ground.p) annotation (Line(
- points={{-80,-70},{-80,-80}}, color={0,0,255}));
- connect(resistor.n, currentSensor.p) annotation (Line(
- points={{30,20},{30,-40},{10,-40}}, color={0,0,255}));
- connect(resistor.p, rectifier.dc_p) annotation (Line(
- points={{30,40},{-20,40}}, color={0,0,255}));
- connect(sineVoltage.plug_p, resistor1.plug_n) annotation (Line(points={{-80,
- -20},{-80,-20},{-80,-14}}, color={0,0,255}));
- connect(resistor1.plug_p, rectifier.ac) annotation (Line(points={{-80,6},{
- -80,6},{-80,32},{-80,34},{-40,34}}, color={0,0,255}));
- connect(pulse2m.ac, rectifier.ac) annotation (Line(points={{-40,0},{-60,0},
- {-60,16},{-80,16},{-80,34},{-40,34}}, color={0,0,255}));
- annotation (
- experiment(
- StopTime=0.1,
- Tolerance=1e-06,
- Interval=0.0002),
- Documentation(info="
-
This example shows a half controlled 2*m pulse bridge rectifier with resistive load, where m is the number of phases. In case of resistive load the half controlled bridge shows the same output voltage as the
-full controlled bridge.
-
-Plot current currentSensor.i, average current meanCurrent.y, voltage voltageSensor.v and average voltage meanVoltage.v.
-
-"));
- end HalfControlledBridge2mPulse;
-
- model ThyristorBridge2mPulse_R
- "2*m pulse thyristor rectifier bridge with resistive load"
- extends
- ModelicaTest.Electrical.PowerConverters.ExampleTemplates.ThyristorBridge2mPulse(
- pulse2m(constantFiringAngle=constantFiringAngle));
- extends Modelica.Icons.Example;
- import Modelica.Constants.pi;
- parameter SI.Angle constantFiringAngle=30*pi/180
- "Firing angle";
- parameter SI.Resistance R=20 "Load resistance";
- Modelica.Electrical.Analog.Basic.Resistor resistor(R=R) annotation (
- Placement(transformation(
- origin={30,30},
- extent={{10,-10},{-10,10}},
- rotation=90)));
- equation
- connect(resistor.n, currentSensor.p)
- annotation (Line(points={{30,20},{30,-40},{10,-40}}, color={0,0,255}));
- connect(resistor.p, rectifier.dc_p) annotation (Line(points={{30,40},{-10,
- 40},{-10,40},{-20,40}}, color={0,0,255}));
- annotation (
- experiment(
- StopTime=0.1,
- Tolerance=1e-06,
- Interval=0.0002),
- Documentation(info="
-This example shows a full controlled 2*m pulse bridge rectifier with resistive load, where m is the number of phases. In case of resistive load the full controlled bridge shows the same output voltage as the
-half controlled bridge.
-
-Plot current currentSensor.i, average current meanCurrent.y, voltage voltageSensor.v and average voltage meanVoltage.v.
-"));
- end ThyristorBridge2mPulse_R;
-
- package ExampleTemplates
- partial model ThyristorBridge2mPulse
- "Template of 2*m pulse bridge thyristor rectifier"
- extends Modelica.Electrical.PowerConverters.Icons.ExampleTemplate;
- import Modelica.Constants.pi;
- parameter Integer m(final min=3) = 3 "Number of phases" annotation(Evaluate=true);
- parameter SI.Voltage Vrms=110 "RMS supply voltage";
- parameter SI.Frequency f=50 "Frequency";
-
- Modelica.Electrical.Polyphase.Sources.SineVoltage sineVoltage(
- final m=m,
- V=fill(sqrt(2)*Vrms, m),
- phase=-
- Modelica.Electrical.Polyphase.Functions.symmetricOrientation(m),
- f=fill(f, m)) annotation (Placement(transformation(
- extent={{-10,-10},{10,10}},
- rotation=270,
- origin={-80,-30})));
- Modelica.Electrical.PowerConverters.ACDC.ThyristorBridge2mPulse
- rectifier(final m=m)
- annotation (Placement(transformation(extent={{-40,24},{-20,44}})));
- Modelica.Electrical.Analog.Sensors.VoltageSensor voltagesensor
- annotation (Placement(transformation(
- origin={50,10},
- extent={{10,-10},{-10,10}},
- rotation=90)));
- Modelica.Blocks.Math.Mean meanVoltage(f=2*m*f) annotation (Placement(
- transformation(
- extent={{-10,-10},{10,10}},
- origin={80,40})));
- Modelica.Blocks.Math.RootMeanSquare rootMeanSquareVoltage(f=2*m*f)
- annotation (Placement(transformation(
- extent={{-10,-10},{10,10}},
- origin={80,10})));
- Modelica.Electrical.Analog.Sensors.CurrentSensor currentSensor
- annotation (Placement(transformation(
- extent={{-10,10},{10,-10}},
- rotation=180,
- origin={0,-40})));
- Modelica.Blocks.Math.Mean meanCurrent(f=2*m*f) annotation (Placement(
- transformation(
- extent={{-10,-10},{10,10}},
- origin={80,-60})));
- Modelica.Electrical.PowerConverters.ACDC.Control.VoltageBridge2mPulse
- pulse2m(
- m=m,
- f=f,
- useFilter=false) annotation (Placement(transformation(
- extent={{10,10},{-10,-10}},
- rotation=180,
- origin={-30,0})));
- Modelica.Electrical.Polyphase.Basic.MultiStarResistance
- multiStarResistance(final m=m) annotation (Placement(transformation(
- extent={{-10,-10},{10,10}},
- rotation=270,
- origin={-80,-60})));
- Modelica.Electrical.Analog.Basic.Ground ground annotation (Placement(
- transformation(extent={{-90,-100},{-70,-80}})));
- Modelica.Electrical.Polyphase.Basic.Resistor innerResistor(m=m, R=fill(1,
- m)) annotation (Placement(transformation(
- extent={{-10,-10},{10,10}},
- rotation=-90,
- origin={-80,-4})));
- equation
- connect(meanCurrent.u, currentSensor.i) annotation (Line(
- points={{68,-60},{0,-60},{0,-50}}, color={0,0,127}));
- connect(voltagesensor.v, meanVoltage.u) annotation (Line(
- points={{60,10},{64,10},{64,40},{68,40}}, color={0,0,127}));
- connect(voltagesensor.v, rootMeanSquareVoltage.u) annotation (Line(
- points={{60,10},{68,10}}, color={0,0,127}));
- connect(rectifier.dc_n, currentSensor.n) annotation (Line(
- points={{-20,28},{-10,28},{-10,-40}}, color={0,0,255}));
- connect(rectifier.dc_p, voltagesensor.p) annotation (Line(
- points={{-20,40},{50,40},{50,20}}, color={0,0,255}));
- connect(currentSensor.p, voltagesensor.n) annotation (Line(
- points={{10,-40},{50,-40},{50,0}}, color={0,0,255}));
- connect(pulse2m.fire_p, rectifier.fire_p) annotation (Line(
- points={{-36,11},{-36,22}}, color={255,0,255}));
- connect(pulse2m.fire_n, rectifier.fire_n) annotation (Line(
- points={{-24,11},{-24,22}}, color={255,0,255}));
- connect(sineVoltage.plug_n, multiStarResistance.plug) annotation (
- Line(
- points={{-80,-40},{-80,-50}}, color={0,0,255}));
- connect(multiStarResistance.pin, ground.p) annotation (Line(
- points={{-80,-70},{-80,-80}}, color={0,0,255}));
- connect(pulse2m.ac, rectifier.ac) annotation (Line(points={{-40,0},{-60,0},
- {-60,20},{-80,20},{-80,34},{-40,34}}, color={0,0,255}));
- connect(sineVoltage.plug_p, innerResistor.plug_n) annotation (Line(points=
- {{-80,-20},{-80,-20},{-80,-14}}, color={0,0,255}));
- connect(innerResistor.plug_p, rectifier.ac)
- annotation (Line(points={{-80,6},{-80,34},{-40,34}}, color={0,0,255}));
- annotation (
- Documentation(info="
-Template of
-
-2*m pulse bridge rectifiers, where m is the number of phases; load is not yet included.
-"));
- end ThyristorBridge2mPulse;
- end ExampleTemplates;
-end PowerConverters;
diff --git a/ModelicaTest/Electrical/PowerConverters/ExampleTemplates/ThyristorBridge2mPulse.mo b/ModelicaTest/Electrical/PowerConverters/ExampleTemplates/ThyristorBridge2mPulse.mo
new file mode 100644
index 0000000000..cc3e733345
--- /dev/null
+++ b/ModelicaTest/Electrical/PowerConverters/ExampleTemplates/ThyristorBridge2mPulse.mo
@@ -0,0 +1,98 @@
+within ModelicaTest.Electrical.PowerConverters.ExampleTemplates;
+partial model ThyristorBridge2mPulse
+ "Template of 2*m pulse bridge thyristor rectifier"
+ extends Modelica.Electrical.PowerConverters.Icons.ExampleTemplate;
+ import Modelica.Constants.pi;
+ parameter Integer m(final min=3) = 3 "Number of phases" annotation(Evaluate=true);
+ parameter SI.Voltage Vrms=110 "RMS supply voltage";
+ parameter SI.Frequency f=50 "Frequency";
+
+ Modelica.Electrical.Polyphase.Sources.SineVoltage sineVoltage(
+ final m=m,
+ V=fill(sqrt(2)*Vrms, m),
+ phase=-
+ Modelica.Electrical.Polyphase.Functions.symmetricOrientation(m),
+ f=fill(f, m)) annotation (Placement(transformation(
+ extent={{-10,-10},{10,10}},
+ rotation=270,
+ origin={-80,-30})));
+ Modelica.Electrical.PowerConverters.ACDC.ThyristorBridge2mPulse
+ rectifier(final m=m)
+ annotation (Placement(transformation(extent={{-40,24},{-20,44}})));
+ Modelica.Electrical.Analog.Sensors.VoltageSensor voltagesensor
+ annotation (Placement(transformation(
+ origin={50,10},
+ extent={{10,-10},{-10,10}},
+ rotation=90)));
+ Modelica.Blocks.Math.Mean meanVoltage(f=2*m*f) annotation (Placement(
+ transformation(
+ extent={{-10,-10},{10,10}},
+ origin={80,40})));
+ Modelica.Blocks.Math.RootMeanSquare rootMeanSquareVoltage(f=2*m*f)
+ annotation (Placement(transformation(
+ extent={{-10,-10},{10,10}},
+ origin={80,10})));
+ Modelica.Electrical.Analog.Sensors.CurrentSensor currentSensor
+ annotation (Placement(transformation(
+ extent={{-10,10},{10,-10}},
+ rotation=180,
+ origin={0,-40})));
+ Modelica.Blocks.Math.Mean meanCurrent(f=2*m*f) annotation (Placement(
+ transformation(
+ extent={{-10,-10},{10,10}},
+ origin={80,-60})));
+ Modelica.Electrical.PowerConverters.ACDC.Control.VoltageBridge2mPulse
+ pulse2m(
+ m=m,
+ f=f,
+ useFilter=false) annotation (Placement(transformation(
+ extent={{10,10},{-10,-10}},
+ rotation=180,
+ origin={-30,0})));
+ Modelica.Electrical.Polyphase.Basic.MultiStarResistance
+ multiStarResistance(final m=m) annotation (Placement(transformation(
+ extent={{-10,-10},{10,10}},
+ rotation=270,
+ origin={-80,-60})));
+ Modelica.Electrical.Analog.Basic.Ground ground annotation (Placement(
+ transformation(extent={{-90,-100},{-70,-80}})));
+ Modelica.Electrical.Polyphase.Basic.Resistor innerResistor(m=m, R=fill(1,
+ m)) annotation (Placement(transformation(
+ extent={{-10,-10},{10,10}},
+ rotation=-90,
+ origin={-80,-4})));
+equation
+ connect(meanCurrent.u, currentSensor.i) annotation (Line(
+ points={{68,-60},{0,-60},{0,-50}}, color={0,0,127}));
+ connect(voltagesensor.v, meanVoltage.u) annotation (Line(
+ points={{60,10},{64,10},{64,40},{68,40}}, color={0,0,127}));
+ connect(voltagesensor.v, rootMeanSquareVoltage.u) annotation (Line(
+ points={{60,10},{68,10}}, color={0,0,127}));
+ connect(rectifier.dc_n, currentSensor.n) annotation (Line(
+ points={{-20,28},{-10,28},{-10,-40}}, color={0,0,255}));
+ connect(rectifier.dc_p, voltagesensor.p) annotation (Line(
+ points={{-20,40},{50,40},{50,20}}, color={0,0,255}));
+ connect(currentSensor.p, voltagesensor.n) annotation (Line(
+ points={{10,-40},{50,-40},{50,0}}, color={0,0,255}));
+ connect(pulse2m.fire_p, rectifier.fire_p) annotation (Line(
+ points={{-36,11},{-36,22}}, color={255,0,255}));
+ connect(pulse2m.fire_n, rectifier.fire_n) annotation (Line(
+ points={{-24,11},{-24,22}}, color={255,0,255}));
+ connect(sineVoltage.plug_n, multiStarResistance.plug) annotation (
+ Line(
+ points={{-80,-40},{-80,-50}}, color={0,0,255}));
+ connect(multiStarResistance.pin, ground.p) annotation (Line(
+ points={{-80,-70},{-80,-80}}, color={0,0,255}));
+ connect(pulse2m.ac, rectifier.ac) annotation (Line(points={{-40,0},{-60,0},
+ {-60,20},{-80,20},{-80,34},{-40,34}}, color={0,0,255}));
+ connect(sineVoltage.plug_p, innerResistor.plug_n) annotation (Line(points=
+ {{-80,-20},{-80,-20},{-80,-14}}, color={0,0,255}));
+ connect(innerResistor.plug_p, rectifier.ac)
+ annotation (Line(points={{-80,6},{-80,34},{-40,34}}, color={0,0,255}));
+ annotation (
+ Documentation(info="
+Template of
+
+2*m pulse bridge rectifiers, where m is the number of phases; load is not yet included.
+"));
+end ThyristorBridge2mPulse;
diff --git a/ModelicaTest/Electrical/PowerConverters/ExampleTemplates/package.mo b/ModelicaTest/Electrical/PowerConverters/ExampleTemplates/package.mo
new file mode 100644
index 0000000000..bb7debd925
--- /dev/null
+++ b/ModelicaTest/Electrical/PowerConverters/ExampleTemplates/package.mo
@@ -0,0 +1,3 @@
+within ModelicaTest.Electrical.PowerConverters;
+package ExampleTemplates
+end ExampleTemplates;
diff --git a/ModelicaTest/Electrical/PowerConverters/ExampleTemplates/package.order b/ModelicaTest/Electrical/PowerConverters/ExampleTemplates/package.order
new file mode 100644
index 0000000000..d1d2d9aecb
--- /dev/null
+++ b/ModelicaTest/Electrical/PowerConverters/ExampleTemplates/package.order
@@ -0,0 +1 @@
+ThyristorBridge2mPulse
diff --git a/ModelicaTest/Electrical/PowerConverters/Examples/ACAC/Dimmer_R.mo b/ModelicaTest/Electrical/PowerConverters/Examples/ACAC/Dimmer_R.mo
new file mode 100644
index 0000000000..5ffa6d629b
--- /dev/null
+++ b/ModelicaTest/Electrical/PowerConverters/Examples/ACAC/Dimmer_R.mo
@@ -0,0 +1,23 @@
+within ModelicaTest.Electrical.PowerConverters.Examples.ACAC;
+model Dimmer_R "Dimmer with resistive load"
+ extends Modelica.Electrical.PowerConverters.Examples.ACAC.Dimmer_R;
+ annotation (experiment(
+ StopTime=3.00,
+ Interval=0.0002,
+ Tolerance=1e-06),
+ TestCase(shouldPass = true,
+ __ModelicaAssociation(Comparison(TimeWindows={TimeSlot(2.90, 3.00)}))),
+ Documentation(info="
+
+This model demonstrates the behaviour of a dimmer with phase-angle control with resistive load.
+
+
+The reference voltage is prescribed by a trapezoid between zero and full voltage.
+The voltageToAngle block
+calculates the necessary phase angle, which is processed by
+the Signal2mPulse adaptor,
+applying the firing signals to the
+triac.
+
+"));
+end Dimmer_R;
diff --git a/ModelicaTest/Electrical/PowerConverters/Examples/ACAC/Dimmer_RL.mo b/ModelicaTest/Electrical/PowerConverters/Examples/ACAC/Dimmer_RL.mo
new file mode 100644
index 0000000000..cc7ff984b1
--- /dev/null
+++ b/ModelicaTest/Electrical/PowerConverters/Examples/ACAC/Dimmer_RL.mo
@@ -0,0 +1,25 @@
+within ModelicaTest.Electrical.PowerConverters.Examples.ACAC;
+model Dimmer_RL "Dimmer with resistive-inductive load"
+ extends Modelica.Electrical.PowerConverters.Examples.ACAC.Dimmer_RL;
+ annotation (experiment(
+ StopTime=3.00,
+ Interval=0.0002,
+ Tolerance=1e-06),
+ TestCase(shouldPass = true,
+ __ModelicaAssociation(Comparison(TimeWindows={TimeSlot(2.90, 3.00)}))),
+ Documentation(info="
+
+This model demonstrates the behaviour of a dimmer with phase-angle control with resistive-inductive load.
+Note that due to the inductance the current is not zero at the points in time where zero-crossing of the voltage occurs,
+and the triac stays conducting until the current becomes zero.
+
+
+The reference voltage is prescribed by a trapezoid between zero and full voltage.
+The voltageToAngle block
+calculates the necessary phase angle, which is processed by
+the Signal2mPulse adaptor,
+applying the firing signals to the
+triac.
+
+"));
+end Dimmer_RL;
diff --git a/ModelicaTest/Electrical/PowerConverters/Examples/ACAC/SoftStarter.mo b/ModelicaTest/Electrical/PowerConverters/Examples/ACAC/SoftStarter.mo
new file mode 100644
index 0000000000..2be4ed401b
--- /dev/null
+++ b/ModelicaTest/Electrical/PowerConverters/Examples/ACAC/SoftStarter.mo
@@ -0,0 +1,32 @@
+within ModelicaTest.Electrical.PowerConverters.Examples.ACAC;
+model SoftStarter "Soft start of an induction machine"
+ extends Modelica.Electrical.PowerConverters.Examples.ACAC.SoftStarter;
+ annotation (experiment(
+ StopTime=2.60,
+ Interval=0.0002,
+ Tolerance=1e-06),
+ TestCase(shouldPass = true,
+ __ModelicaAssociation(Comparison(TimeWindows={TimeSlot(2.50, 2.60)}))),
+ Documentation(info="
+This model demonstrates a soft start of an induction machine:
+Voltage ramp is started at 0.1 s and should ramp up to nominal voltage within 4s,
+but current is limited to 2.5 times nominal current.
+At 5.5 s a voltage ramp down within 3 s is required.
+
+Reference voltage is controlled by the
+softStartControl block,
+reference voltage is converted to firing angle by the
+voltageToAngle block.
+Firing angle is processed by the
+Signal2mPulse adaptor
+to firing signals which are applied to the
+triac.
+
+
+Compare starting with firing angle by
+starting direct on line,
+star-delta starting, and
+starting via a transformer.
+
+"));
+end SoftStarter;
diff --git a/ModelicaTest/Electrical/PowerConverters/Examples/ACAC/package.mo b/ModelicaTest/Electrical/PowerConverters/Examples/ACAC/package.mo
new file mode 100644
index 0000000000..1ad4424d4b
--- /dev/null
+++ b/ModelicaTest/Electrical/PowerConverters/Examples/ACAC/package.mo
@@ -0,0 +1,4 @@
+within ModelicaTest.Electrical.PowerConverters.Examples;
+package ACAC "AC to AC converter examples"
+ extends Modelica.Icons.ExamplesPackage;
+end ACAC;
diff --git a/ModelicaTest/Electrical/PowerConverters/Examples/ACAC/package.order b/ModelicaTest/Electrical/PowerConverters/Examples/ACAC/package.order
new file mode 100644
index 0000000000..6c30ad59b2
--- /dev/null
+++ b/ModelicaTest/Electrical/PowerConverters/Examples/ACAC/package.order
@@ -0,0 +1,3 @@
+Dimmer_R
+Dimmer_RL
+SoftStarter
diff --git a/ModelicaTest/Electrical/PowerConverters/Examples/ACDC/Rectifier1Pulse/Thyristor1Pulse_R_Characteristic.mo b/ModelicaTest/Electrical/PowerConverters/Examples/ACDC/Rectifier1Pulse/Thyristor1Pulse_R_Characteristic.mo
new file mode 100644
index 0000000000..f901dffd0b
--- /dev/null
+++ b/ModelicaTest/Electrical/PowerConverters/Examples/ACDC/Rectifier1Pulse/Thyristor1Pulse_R_Characteristic.mo
@@ -0,0 +1,16 @@
+within ModelicaTest.Electrical.PowerConverters.Examples.ACDC.Rectifier1Pulse;
+model Thyristor1Pulse_R_Characteristic
+ "Control characteristic of one pulse rectifier with resistive load"
+ extends Modelica.Electrical.PowerConverters.Examples.ACDC.Rectifier1Pulse.Thyristor1Pulse_R_Characteristic;
+ annotation (
+ experiment(
+ StopTime=5.05,
+ Tolerance=1e-06,
+ Interval=0.0002),
+ TestCase(shouldPass = true,
+ __ModelicaAssociation(Comparison(TimeWindows={TimeSlot(4.95, 5.05)}))),
+ Documentation(info="
+This example demonstrates the operational behavior of a single-phase controlled rectifier with variable firing angle and resistive load. The average load voltage can be controlled by means of the firing angle.
+
Plot average voltage meanVoltage.v versus firingAngle pulse2.firingAngle to see control characteristic of this type of rectifier with resistive load.
+"));
+end Thyristor1Pulse_R_Characteristic;
diff --git a/ModelicaTest/Electrical/PowerConverters/Examples/ACDC/Rectifier1Pulse/package.mo b/ModelicaTest/Electrical/PowerConverters/Examples/ACDC/Rectifier1Pulse/package.mo
new file mode 100644
index 0000000000..3c5b80e06f
--- /dev/null
+++ b/ModelicaTest/Electrical/PowerConverters/Examples/ACDC/Rectifier1Pulse/package.mo
@@ -0,0 +1,4 @@
+within ModelicaTest.Electrical.PowerConverters.Examples.ACDC;
+package Rectifier1Pulse
+ extends Modelica.Icons.ExamplesPackage;
+end Rectifier1Pulse;
diff --git a/ModelicaTest/Electrical/PowerConverters/Examples/ACDC/Rectifier1Pulse/package.order b/ModelicaTest/Electrical/PowerConverters/Examples/ACDC/Rectifier1Pulse/package.order
new file mode 100644
index 0000000000..85a28fe244
--- /dev/null
+++ b/ModelicaTest/Electrical/PowerConverters/Examples/ACDC/Rectifier1Pulse/package.order
@@ -0,0 +1 @@
+Thyristor1Pulse_R_Characteristic
diff --git a/ModelicaTest/Electrical/PowerConverters/Examples/ACDC/RectifierBridge2Pulse/ThyristorBridge2Pulse_DC_Drive.mo b/ModelicaTest/Electrical/PowerConverters/Examples/ACDC/RectifierBridge2Pulse/ThyristorBridge2Pulse_DC_Drive.mo
new file mode 100644
index 0000000000..98024e1a1f
--- /dev/null
+++ b/ModelicaTest/Electrical/PowerConverters/Examples/ACDC/RectifierBridge2Pulse/ThyristorBridge2Pulse_DC_Drive.mo
@@ -0,0 +1,20 @@
+within ModelicaTest.Electrical.PowerConverters.Examples.ACDC.RectifierBridge2Pulse;
+model ThyristorBridge2Pulse_DC_Drive
+ "Two pulse Graetz thyristor bridge feeding a DC drive"
+ extends Modelica.Electrical.PowerConverters.Examples.ACDC.RectifierBridge2Pulse.ThyristorBridge2Pulse_DC_Drive;
+ annotation (
+ experiment(
+ StopTime=2.55,
+ Interval=0.0002,
+ Tolerance=1e-006),
+ TestCase(shouldPass = true,
+ __ModelicaAssociation(Comparison(TimeWindows={TimeSlot(2.45, 2.55)}))),
+ Documentation(info="
+
+In this example a PM excited DC machine is started with nominal torque at nominal speed. After 5 seconds, load torque is reduced to zero over a period of additional 10 seconds. At 15 seconds, the machine is operating at no load.
+
+
+
+Plot torque tau, current currentSensor.i and average current meanCurrent.y. Also plot speed w, voltage voltageSensor.v and the average voltage meanVoltage.y.
+"));
+end ThyristorBridge2Pulse_DC_Drive;
diff --git a/ModelicaTest/Electrical/PowerConverters/Examples/ACDC/RectifierBridge2Pulse/ThyristorBridge2Pulse_RLV_Characteristic.mo b/ModelicaTest/Electrical/PowerConverters/Examples/ACDC/RectifierBridge2Pulse/ThyristorBridge2Pulse_RLV_Characteristic.mo
new file mode 100644
index 0000000000..d767346c5e
--- /dev/null
+++ b/ModelicaTest/Electrical/PowerConverters/Examples/ACDC/RectifierBridge2Pulse/ThyristorBridge2Pulse_RLV_Characteristic.mo
@@ -0,0 +1,18 @@
+within ModelicaTest.Electrical.PowerConverters.Examples.ACDC.RectifierBridge2Pulse;
+model ThyristorBridge2Pulse_RLV_Characteristic
+ "Characteristic of two pulse Graetz thyristor bridge rectifier with R-L load and voltage"
+ extends Modelica.Electrical.PowerConverters.Examples.ACDC.RectifierBridge2Pulse.ThyristorBridge2Pulse_RLV_Characteristic;
+ annotation (
+ experiment(
+ StopTime=5.05,
+ Interval=0.0002,
+ Tolerance=1e-06),
+ TestCase(shouldPass = true,
+ __ModelicaAssociation(Comparison(TimeWindows={TimeSlot(4.95, 5.05)}))),
+ Documentation(info="
+
+This examples shows a two pulse full controlled bridge example with R-L load including DC voltage source. The additional DC voltage source in this example enables negative average load voltages.
+
+Plot average voltage meanVoltage.v versus firingAngle pulse2.firingAngle to see control characteristic of this type of rectifier with R-L load including active voltage.
+"));
+end ThyristorBridge2Pulse_RLV_Characteristic;
diff --git a/ModelicaTest/Electrical/PowerConverters/Examples/ACDC/RectifierBridge2Pulse/package.mo b/ModelicaTest/Electrical/PowerConverters/Examples/ACDC/RectifierBridge2Pulse/package.mo
new file mode 100644
index 0000000000..ba18c2e654
--- /dev/null
+++ b/ModelicaTest/Electrical/PowerConverters/Examples/ACDC/RectifierBridge2Pulse/package.mo
@@ -0,0 +1,5 @@
+within ModelicaTest.Electrical.PowerConverters.Examples.ACDC;
+package RectifierBridge2Pulse
+ extends Modelica.Icons.ExamplesPackage;
+
+end RectifierBridge2Pulse;
diff --git a/ModelicaTest/Electrical/PowerConverters/Examples/ACDC/RectifierBridge2Pulse/package.order b/ModelicaTest/Electrical/PowerConverters/Examples/ACDC/RectifierBridge2Pulse/package.order
new file mode 100644
index 0000000000..27cd3ad16d
--- /dev/null
+++ b/ModelicaTest/Electrical/PowerConverters/Examples/ACDC/RectifierBridge2Pulse/package.order
@@ -0,0 +1,2 @@
+ThyristorBridge2Pulse_RLV_Characteristic
+ThyristorBridge2Pulse_DC_Drive
diff --git a/ModelicaTest/Electrical/PowerConverters/Examples/ACDC/RectifierBridge2mPulse/ThyristorBridge2mPulse_DC_Drive.mo b/ModelicaTest/Electrical/PowerConverters/Examples/ACDC/RectifierBridge2mPulse/ThyristorBridge2mPulse_DC_Drive.mo
new file mode 100644
index 0000000000..3fdf311b82
--- /dev/null
+++ b/ModelicaTest/Electrical/PowerConverters/Examples/ACDC/RectifierBridge2mPulse/ThyristorBridge2mPulse_DC_Drive.mo
@@ -0,0 +1,19 @@
+within ModelicaTest.Electrical.PowerConverters.Examples.ACDC.RectifierBridge2mPulse;
+model ThyristorBridge2mPulse_DC_Drive
+ "2*m pulse thyristor bridge feeding a DC drive"
+ extends Modelica.Electrical.PowerConverters.Examples.ACDC.RectifierBridge2mPulse.ThyristorBridge2mPulse_DC_Drive;
+ annotation (
+ experiment(
+ StopTime=2.55,
+ Interval=0.0002,
+ Tolerance=1e-006),
+ TestCase(shouldPass = true,
+ __ModelicaAssociation(Comparison(TimeWindows={TimeSlot(2.45, 2.55)}))),
+ Documentation(info="
+
+In this example a PM excited DC machine is started with nominal torque at nominal speed. After 5 seconds, load torque is reduced to zero over a period of additional 10 seconds. At 15 seconds, the machine is operating at no load.
+
+
+Plot current currentSensor.i, average current meanCurrent.y, voltage voltageSensor.v and average voltage meanVoltage.v.
+"));
+end ThyristorBridge2mPulse_DC_Drive;
diff --git a/ModelicaTest/Electrical/PowerConverters/Examples/ACDC/RectifierBridge2mPulse/ThyristorBridge2mPulse_RLV_Characteristic.mo b/ModelicaTest/Electrical/PowerConverters/Examples/ACDC/RectifierBridge2mPulse/ThyristorBridge2mPulse_RLV_Characteristic.mo
new file mode 100644
index 0000000000..8cb24e45de
--- /dev/null
+++ b/ModelicaTest/Electrical/PowerConverters/Examples/ACDC/RectifierBridge2mPulse/ThyristorBridge2mPulse_RLV_Characteristic.mo
@@ -0,0 +1,17 @@
+within ModelicaTest.Electrical.PowerConverters.Examples.ACDC.RectifierBridge2mPulse;
+model ThyristorBridge2mPulse_RLV_Characteristic
+ "Characteristic of 2*m pulse thyristor rectifier bridge with R-L load and voltage"
+ extends Modelica.Electrical.PowerConverters.Examples.ACDC.RectifierBridge2mPulse.ThyristorBridge2mPulse_RLV_Characteristic;
+ annotation (
+ experiment(
+ StopTime=5.05,
+ Interval=0.0002,
+ Tolerance=1e-06),
+ TestCase(shouldPass = true,
+ __ModelicaAssociation(Comparison(TimeWindows={TimeSlot(4.95, 5.05)}))),
+ Documentation(info="
+This example shows a full controlled 2*m pulse bridge rectifier with R-L load including DC voltage source, where m is the number of phases. The additional DC voltage source in this example enables negative average load voltages.
+
+Plot average voltage meanVoltage.v versus firingAngle pulse2m.firingAngle to see control characteristic of this type of rectifier with R-L load including active voltage.
+"));
+end ThyristorBridge2mPulse_RLV_Characteristic;
diff --git a/ModelicaTest/Electrical/PowerConverters/Examples/ACDC/RectifierBridge2mPulse/package.mo b/ModelicaTest/Electrical/PowerConverters/Examples/ACDC/RectifierBridge2mPulse/package.mo
new file mode 100644
index 0000000000..47fa74f0aa
--- /dev/null
+++ b/ModelicaTest/Electrical/PowerConverters/Examples/ACDC/RectifierBridge2mPulse/package.mo
@@ -0,0 +1,4 @@
+within ModelicaTest.Electrical.PowerConverters.Examples.ACDC;
+package RectifierBridge2mPulse
+ extends Modelica.Icons.ExamplesPackage;
+end RectifierBridge2mPulse;
diff --git a/ModelicaTest/Electrical/PowerConverters/Examples/ACDC/RectifierBridge2mPulse/package.order b/ModelicaTest/Electrical/PowerConverters/Examples/ACDC/RectifierBridge2mPulse/package.order
new file mode 100644
index 0000000000..e1ff6ac0a1
--- /dev/null
+++ b/ModelicaTest/Electrical/PowerConverters/Examples/ACDC/RectifierBridge2mPulse/package.order
@@ -0,0 +1,2 @@
+ThyristorBridge2mPulse_RLV_Characteristic
+ThyristorBridge2mPulse_DC_Drive
diff --git a/ModelicaTest/Electrical/PowerConverters/Examples/ACDC/RectifierCenterTap2Pulse/ThyristorCenterTap2Pulse_RLV_Characteristic.mo b/ModelicaTest/Electrical/PowerConverters/Examples/ACDC/RectifierCenterTap2Pulse/ThyristorCenterTap2Pulse_RLV_Characteristic.mo
new file mode 100644
index 0000000000..67cf3e37a4
--- /dev/null
+++ b/ModelicaTest/Electrical/PowerConverters/Examples/ACDC/RectifierCenterTap2Pulse/ThyristorCenterTap2Pulse_RLV_Characteristic.mo
@@ -0,0 +1,17 @@
+within ModelicaTest.Electrical.PowerConverters.Examples.ACDC.RectifierCenterTap2Pulse;
+model ThyristorCenterTap2Pulse_RLV_Characteristic
+ "Characteristic of two pulse thyristor rectifier with center tap and R-L load and voltage"
+ extends Modelica.Electrical.PowerConverters.Examples.ACDC.RectifierCenterTap2Pulse.ThyristorCenterTap2Pulse_RLV_Characteristic;
+ annotation (
+ experiment(
+ StopTime=5.05,
+ Tolerance=1e-06,
+ Interval=0.0002),
+ TestCase(shouldPass = true,
+ __ModelicaAssociation(Comparison(TimeWindows={TimeSlot(4.95, 5.05)}))),
+ Documentation(info="
+This example shows a controlled center tap two pulse rectifier with R-L load including DC voltage source. The additional DC voltage source in this example enables negative average load voltages.
+
+Plot average voltage meanVoltage.v versus firingAngle pulse2.firingAngle to see control characteristic of this type of rectifier with R-L load including active voltage.
+"));
+end ThyristorCenterTap2Pulse_RLV_Characteristic;
diff --git a/ModelicaTest/Electrical/PowerConverters/Examples/ACDC/RectifierCenterTap2Pulse/package.mo b/ModelicaTest/Electrical/PowerConverters/Examples/ACDC/RectifierCenterTap2Pulse/package.mo
new file mode 100644
index 0000000000..7137487065
--- /dev/null
+++ b/ModelicaTest/Electrical/PowerConverters/Examples/ACDC/RectifierCenterTap2Pulse/package.mo
@@ -0,0 +1,4 @@
+within ModelicaTest.Electrical.PowerConverters.Examples.ACDC;
+package RectifierCenterTap2Pulse
+ extends Modelica.Icons.ExamplesPackage;
+end RectifierCenterTap2Pulse;
diff --git a/ModelicaTest/Electrical/PowerConverters/Examples/ACDC/RectifierCenterTap2Pulse/package.order b/ModelicaTest/Electrical/PowerConverters/Examples/ACDC/RectifierCenterTap2Pulse/package.order
new file mode 100644
index 0000000000..4847adfe95
--- /dev/null
+++ b/ModelicaTest/Electrical/PowerConverters/Examples/ACDC/RectifierCenterTap2Pulse/package.order
@@ -0,0 +1 @@
+ThyristorCenterTap2Pulse_RLV_Characteristic
diff --git a/ModelicaTest/Electrical/PowerConverters/Examples/ACDC/RectifierCenterTap2mPulse/ThyristorCenterTap2mPulse_RLV_Characteristic.mo b/ModelicaTest/Electrical/PowerConverters/Examples/ACDC/RectifierCenterTap2mPulse/ThyristorCenterTap2mPulse_RLV_Characteristic.mo
new file mode 100644
index 0000000000..fc24c5d161
--- /dev/null
+++ b/ModelicaTest/Electrical/PowerConverters/Examples/ACDC/RectifierCenterTap2mPulse/ThyristorCenterTap2mPulse_RLV_Characteristic.mo
@@ -0,0 +1,17 @@
+within ModelicaTest.Electrical.PowerConverters.Examples.ACDC.RectifierCenterTap2mPulse;
+model ThyristorCenterTap2mPulse_RLV_Characteristic
+ "Characteristic of 2*m pulse center tap thyristor rectifier with R-L load and voltage"
+ extends Modelica.Electrical.PowerConverters.Examples.ACDC.RectifierCenterTap2mPulse.ThyristorCenterTap2mPulse_RLV_Characteristic;
+ annotation (
+ experiment(
+ StopTime=5.05,
+ Tolerance=1e-06,
+ Interval=0.0002),
+ TestCase(shouldPass = true,
+ __ModelicaAssociation(Comparison(TimeWindows={TimeSlot(4.95, 5.05)}))),
+ Documentation(info="
+This example shows a controlled 2*m pulse center tap rectifier with R-L load including DC voltage source, where m is the number of phases. The additional DC voltage source in this example enables negative average load voltages.
+
+Plot average voltage meanVoltage.v versus firingAngle pulsem.firingAngle to see control characteristic of this type of rectifier with R-L load including active voltage.
+"));
+end ThyristorCenterTap2mPulse_RLV_Characteristic;
diff --git a/ModelicaTest/Electrical/PowerConverters/Examples/ACDC/RectifierCenterTap2mPulse/package.mo b/ModelicaTest/Electrical/PowerConverters/Examples/ACDC/RectifierCenterTap2mPulse/package.mo
new file mode 100644
index 0000000000..89c265b7ff
--- /dev/null
+++ b/ModelicaTest/Electrical/PowerConverters/Examples/ACDC/RectifierCenterTap2mPulse/package.mo
@@ -0,0 +1,4 @@
+within ModelicaTest.Electrical.PowerConverters.Examples.ACDC;
+package RectifierCenterTap2mPulse
+ extends Modelica.Icons.ExamplesPackage;
+end RectifierCenterTap2mPulse;
diff --git a/ModelicaTest/Electrical/PowerConverters/Examples/ACDC/RectifierCenterTap2mPulse/package.order b/ModelicaTest/Electrical/PowerConverters/Examples/ACDC/RectifierCenterTap2mPulse/package.order
new file mode 100644
index 0000000000..1f6b475fe3
--- /dev/null
+++ b/ModelicaTest/Electrical/PowerConverters/Examples/ACDC/RectifierCenterTap2mPulse/package.order
@@ -0,0 +1 @@
+ThyristorCenterTap2mPulse_RLV_Characteristic
diff --git a/ModelicaTest/Electrical/PowerConverters/Examples/ACDC/RectifierCenterTapmPulse/ThyristorCenterTapmPulse_RLV_Characteristic.mo b/ModelicaTest/Electrical/PowerConverters/Examples/ACDC/RectifierCenterTapmPulse/ThyristorCenterTapmPulse_RLV_Characteristic.mo
new file mode 100644
index 0000000000..6e731f18ea
--- /dev/null
+++ b/ModelicaTest/Electrical/PowerConverters/Examples/ACDC/RectifierCenterTapmPulse/ThyristorCenterTapmPulse_RLV_Characteristic.mo
@@ -0,0 +1,17 @@
+within ModelicaTest.Electrical.PowerConverters.Examples.ACDC.RectifierCenterTapmPulse;
+model ThyristorCenterTapmPulse_RLV_Characteristic
+ "Characteristic of 2*m pulse thyristor rectifier with center tap and R-L load and voltage"
+ extends Modelica.Electrical.PowerConverters.Examples.ACDC.RectifierCenterTapmPulse.ThyristorCenterTapmPulse_RLV_Characteristic;
+ annotation (
+ experiment(
+ StopTime=5.05,
+ Tolerance=1e-06,
+ Interval=0.0002),
+ TestCase(shouldPass = true,
+ __ModelicaAssociation(Comparison(TimeWindows={TimeSlot(4.95, 5.05)}))),
+ Documentation(info="
+This example shows a controlled m pulse center tap rectifier with R-L load including DC voltage source, where m is the number of phases. The additional DC voltage source in this example enables negative average load voltages.
+
+Plot average voltage meanVoltage.v versus firingAngle pulsem.firingAngle to see control characteristic of this type of rectifier with R-L load including active voltage.
+"));
+end ThyristorCenterTapmPulse_RLV_Characteristic;
diff --git a/ModelicaTest/Electrical/PowerConverters/Examples/ACDC/RectifierCenterTapmPulse/package.mo b/ModelicaTest/Electrical/PowerConverters/Examples/ACDC/RectifierCenterTapmPulse/package.mo
new file mode 100644
index 0000000000..432af632df
--- /dev/null
+++ b/ModelicaTest/Electrical/PowerConverters/Examples/ACDC/RectifierCenterTapmPulse/package.mo
@@ -0,0 +1,4 @@
+within ModelicaTest.Electrical.PowerConverters.Examples.ACDC;
+package RectifierCenterTapmPulse
+ extends Modelica.Icons.ExamplesPackage;
+end RectifierCenterTapmPulse;
diff --git a/ModelicaTest/Electrical/PowerConverters/Examples/ACDC/RectifierCenterTapmPulse/package.order b/ModelicaTest/Electrical/PowerConverters/Examples/ACDC/RectifierCenterTapmPulse/package.order
new file mode 100644
index 0000000000..7fae958093
--- /dev/null
+++ b/ModelicaTest/Electrical/PowerConverters/Examples/ACDC/RectifierCenterTapmPulse/package.order
@@ -0,0 +1 @@
+ThyristorCenterTapmPulse_RLV_Characteristic
diff --git a/ModelicaTest/Electrical/PowerConverters/Examples/ACDC/package.mo b/ModelicaTest/Electrical/PowerConverters/Examples/ACDC/package.mo
new file mode 100644
index 0000000000..0353b5f080
--- /dev/null
+++ b/ModelicaTest/Electrical/PowerConverters/Examples/ACDC/package.mo
@@ -0,0 +1,4 @@
+within ModelicaTest.Electrical.PowerConverters.Examples;
+package ACDC
+ extends Modelica.Icons.ExamplesPackage;
+end ACDC;
diff --git a/ModelicaTest/Electrical/PowerConverters/Examples/ACDC/package.order b/ModelicaTest/Electrical/PowerConverters/Examples/ACDC/package.order
new file mode 100644
index 0000000000..45372ad24c
--- /dev/null
+++ b/ModelicaTest/Electrical/PowerConverters/Examples/ACDC/package.order
@@ -0,0 +1,6 @@
+Rectifier1Pulse
+RectifierBridge2Pulse
+RectifierCenterTap2Pulse
+RectifierCenterTapmPulse
+RectifierBridge2mPulse
+RectifierCenterTap2mPulse
diff --git a/ModelicaTest/Electrical/PowerConverters/Examples/DCDC/HBridge/HBridge_DC_Drive.mo b/ModelicaTest/Electrical/PowerConverters/Examples/DCDC/HBridge/HBridge_DC_Drive.mo
new file mode 100644
index 0000000000..1205ba2099
--- /dev/null
+++ b/ModelicaTest/Electrical/PowerConverters/Examples/DCDC/HBridge/HBridge_DC_Drive.mo
@@ -0,0 +1,51 @@
+within ModelicaTest.Electrical.PowerConverters.Examples.DCDC.HBridge;
+model HBridge_DC_Drive "H bridge DC/DC converter with DC drive"
+ extends Modelica.Electrical.PowerConverters.Examples.DCDC.HBridge.HBridge_DC_Drive;
+ annotation (
+ experiment(
+ StopTime=4.10,
+ Interval=0.0002,
+ Tolerance=1e-06),
+ TestCase(shouldPass = true,
+ __ModelicaAssociation(Comparison(TimeWindows={TimeSlot(4.00, 4.10)}))),
+ Documentation(info="
+This example of an H bridge with DC drive demonstrates the operation of the DC machine in four quadrants.
+The DC output voltage is equal to 2 * (dutyCycle - 0.5) times the input voltage.
+
+
+
+ | start time (s) |
+ machine speed |
+ machine torque |
+ mode |
+
+
+ | 0 | zero | zero | |
+
+
+ | 3 | positive | zero | |
+
+
+ | 6 | positive | positive | motor |
+
+
+ | 9.5 | positive | negative | generator |
+
+
+ | 12.5 | negative | negative | motor |
+
+
+ | 15.5 | negative | positive | generator |
+
+
+ | 19 | negative | zero | |
+
+
+ | 22 | zero | zero | |
+
+
+
+
+Plot machine current dcpm.ia, averaged current meanCurrent.y, machine speed dcpm.wMechanical, averaged machine speed dcpm.va and torque dcpm.tauElectrical.
+"));
+end HBridge_DC_Drive;
diff --git a/ModelicaTest/Electrical/PowerConverters/Examples/DCDC/HBridge/package.mo b/ModelicaTest/Electrical/PowerConverters/Examples/DCDC/HBridge/package.mo
new file mode 100644
index 0000000000..270baed2e9
--- /dev/null
+++ b/ModelicaTest/Electrical/PowerConverters/Examples/DCDC/HBridge/package.mo
@@ -0,0 +1,4 @@
+within ModelicaTest.Electrical.PowerConverters.Examples.DCDC;
+package HBridge
+ extends Modelica.Icons.ExamplesPackage;
+end HBridge;
diff --git a/ModelicaTest/Electrical/PowerConverters/Examples/DCDC/HBridge/package.order b/ModelicaTest/Electrical/PowerConverters/Examples/DCDC/HBridge/package.order
new file mode 100644
index 0000000000..04509ed53b
--- /dev/null
+++ b/ModelicaTest/Electrical/PowerConverters/Examples/DCDC/HBridge/package.order
@@ -0,0 +1 @@
+HBridge_DC_Drive
diff --git a/ModelicaTest/Electrical/PowerConverters/Examples/DCDC/package.mo b/ModelicaTest/Electrical/PowerConverters/Examples/DCDC/package.mo
new file mode 100644
index 0000000000..bd10f0b936
--- /dev/null
+++ b/ModelicaTest/Electrical/PowerConverters/Examples/DCDC/package.mo
@@ -0,0 +1,4 @@
+within ModelicaTest.Electrical.PowerConverters.Examples;
+package DCDC
+ extends Modelica.Icons.ExamplesPackage;
+end DCDC;
diff --git a/ModelicaTest/Electrical/PowerConverters/Examples/DCDC/package.order b/ModelicaTest/Electrical/PowerConverters/Examples/DCDC/package.order
new file mode 100644
index 0000000000..b9aeace387
--- /dev/null
+++ b/ModelicaTest/Electrical/PowerConverters/Examples/DCDC/package.order
@@ -0,0 +1 @@
+HBridge
diff --git a/ModelicaTest/Electrical/PowerConverters/Examples/package.mo b/ModelicaTest/Electrical/PowerConverters/Examples/package.mo
new file mode 100644
index 0000000000..dfd21a0d6c
--- /dev/null
+++ b/ModelicaTest/Electrical/PowerConverters/Examples/package.mo
@@ -0,0 +1,4 @@
+within ModelicaTest.Electrical.PowerConverters;
+package Examples
+ extends Modelica.Icons.ExamplesPackage;
+end Examples;
diff --git a/ModelicaTest/Electrical/PowerConverters/Examples/package.order b/ModelicaTest/Electrical/PowerConverters/Examples/package.order
new file mode 100644
index 0000000000..328278359d
--- /dev/null
+++ b/ModelicaTest/Electrical/PowerConverters/Examples/package.order
@@ -0,0 +1,3 @@
+ACDC
+DCDC
+ACAC
diff --git a/ModelicaTest/Electrical/PowerConverters/HalfControlledBridge2mPulse.mo b/ModelicaTest/Electrical/PowerConverters/HalfControlledBridge2mPulse.mo
new file mode 100644
index 0000000000..b0ef464f2d
--- /dev/null
+++ b/ModelicaTest/Electrical/PowerConverters/HalfControlledBridge2mPulse.mo
@@ -0,0 +1,118 @@
+within ModelicaTest.Electrical.PowerConverters;
+model HalfControlledBridge2mPulse
+ "2*m pulse half controlled rectifier bridge with resistive load"
+ import Modelica_Electrical_PowerConverters =
+ Modelica.Electrical.PowerConverters;
+ extends Modelica.Icons.Example;
+ import Modelica.Constants.pi;
+ parameter Integer m(final min=3) = 3 "Number of phases" annotation(Evaluate=true);
+ parameter SI.Voltage Vrms=110 "RMS supply voltage";
+ parameter SI.Frequency f=50 "Frequency";
+ parameter SI.Angle constantFiringAngle=30*pi/180
+ "Firing angle";
+ parameter SI.Resistance R=20 "Load resistance";
+
+ Modelica.Electrical.Polyphase.Sources.SineVoltage sineVoltage(
+ final m=m,
+ V=fill(sqrt(2)*Vrms, m),
+ phase=-
+ Modelica.Electrical.Polyphase.Functions.symmetricOrientation(m),
+ f=fill(f, m)) annotation (Placement(transformation(
+ extent={{-10,-10},{10,10}},
+ rotation=270,
+ origin={-80,-30})));
+ Modelica_Electrical_PowerConverters.ACDC.HalfControlledBridge2mPulse
+ rectifier(final m=m, offStart_p=fill(true, m))
+ annotation (Placement(transformation(extent={{-40,24},{-20,44}})));
+ Modelica.Electrical.Analog.Sensors.VoltageSensor voltagesensor
+ annotation (Placement(transformation(
+ origin={50,10},
+ extent={{10,-10},{-10,10}},
+ rotation=90)));
+ Modelica.Blocks.Math.Mean meanVoltage(f=2*m*f) annotation (Placement(
+ transformation(
+ extent={{-10,-10},{10,10}},
+ origin={80,40})));
+ Modelica.Blocks.Math.RootMeanSquare rootMeanSquareVoltage(f=2*m*f)
+ annotation (Placement(transformation(
+ extent={{-10,-10},{10,10}},
+ origin={80,10})));
+ Modelica.Electrical.Analog.Sensors.CurrentSensor currentSensor
+ annotation (Placement(transformation(
+ extent={{-10,10},{10,-10}},
+ rotation=180,
+ origin={0,-40})));
+ Modelica.Blocks.Math.Mean meanCurrent(f=2*m*f) annotation (Placement(
+ transformation(
+ extent={{-10,-10},{10,10}},
+ origin={80,-60})));
+ Modelica_Electrical_PowerConverters.ACDC.Control.VoltageBridge2mPulse
+ pulse2m(
+ m=m,
+ f=f,
+ useFilter=false,
+ constantFiringAngle=constantFiringAngle) annotation (Placement(
+ transformation(
+ extent={{10,10},{-10,-10}},
+ rotation=180,
+ origin={-30,0})));
+ Modelica.Electrical.Polyphase.Basic.MultiStarResistance
+ multiStarResistance(final m=m) annotation (Placement(transformation(
+ extent={{-10,-10},{10,10}},
+ rotation=270,
+ origin={-80,-60})));
+ Modelica.Electrical.Analog.Basic.Ground ground annotation (Placement(
+ transformation(extent={{-90,-100},{-70,-80}})));
+ Modelica.Electrical.Analog.Basic.Resistor resistor(R=R) annotation (
+ Placement(transformation(
+ origin={30,30},
+ extent={{10,-10},{-10,10}},
+ rotation=90)));
+ Modelica.Electrical.Polyphase.Basic.Resistor resistor1(m=m, R=fill(1, m))
+ annotation (Placement(transformation(
+ extent={{-10,-10},{10,10}},
+ rotation=-90,
+ origin={-80,-4})));
+equation
+ connect(meanCurrent.u, currentSensor.i) annotation (Line(
+ points={{68,-60},{0,-60},{0,-50}}, color={0,0,127}));
+ connect(voltagesensor.v, meanVoltage.u) annotation (Line(
+ points={{60,10},{64,10},{64,40},{68,40}}, color={0,0,127}));
+ connect(voltagesensor.v, rootMeanSquareVoltage.u) annotation (Line(
+ points={{60,10},{68,10}}, color={0,0,127}));
+ connect(rectifier.dc_n, currentSensor.n) annotation (Line(
+ points={{-20,28},{-10,28},{-10,-40}}, color={0,0,255}));
+ connect(rectifier.dc_p, voltagesensor.p) annotation (Line(
+ points={{-20,40},{50,40},{50,20}}, color={0,0,255}));
+ connect(currentSensor.p, voltagesensor.n) annotation (Line(
+ points={{10,-40},{50,-40},{50,0}}, color={0,0,255}));
+ connect(pulse2m.fire_p, rectifier.fire_p) annotation (Line(
+ points={{-36,11},{-36,22}}, color={255,0,255}));
+ connect(sineVoltage.plug_n, multiStarResistance.plug) annotation (
+ Line(
+ points={{-80,-40},{-80,-50}}, color={0,0,255}));
+ connect(multiStarResistance.pin, ground.p) annotation (Line(
+ points={{-80,-70},{-80,-80}}, color={0,0,255}));
+ connect(resistor.n, currentSensor.p) annotation (Line(
+ points={{30,20},{30,-40},{10,-40}}, color={0,0,255}));
+ connect(resistor.p, rectifier.dc_p) annotation (Line(
+ points={{30,40},{-20,40}}, color={0,0,255}));
+ connect(sineVoltage.plug_p, resistor1.plug_n) annotation (Line(points={{-80,
+ -20},{-80,-20},{-80,-14}}, color={0,0,255}));
+ connect(resistor1.plug_p, rectifier.ac) annotation (Line(points={{-80,6},{
+ -80,6},{-80,32},{-80,34},{-40,34}}, color={0,0,255}));
+ connect(pulse2m.ac, rectifier.ac) annotation (Line(points={{-40,0},{-60,0},
+ {-60,16},{-80,16},{-80,34},{-40,34}}, color={0,0,255}));
+ annotation (
+ experiment(
+ StopTime=0.1,
+ Tolerance=1e-06,
+ Interval=0.0002),
+ Documentation(info="
+This example shows a half controlled 2*m pulse bridge rectifier with resistive load, where m is the number of phases. In case of resistive load the half controlled bridge shows the same output voltage as the
+full controlled bridge.
+
+Plot current currentSensor.i, average current meanCurrent.y, voltage voltageSensor.v and average voltage meanVoltage.v.
+
+"));
+end HalfControlledBridge2mPulse;
diff --git a/ModelicaTest/Electrical/PowerConverters/ThyristorBridge2mPulse_R.mo b/ModelicaTest/Electrical/PowerConverters/ThyristorBridge2mPulse_R.mo
new file mode 100644
index 0000000000..273dcd11cd
--- /dev/null
+++ b/ModelicaTest/Electrical/PowerConverters/ThyristorBridge2mPulse_R.mo
@@ -0,0 +1,33 @@
+within ModelicaTest.Electrical.PowerConverters;
+model ThyristorBridge2mPulse_R
+ "2*m pulse thyristor rectifier bridge with resistive load"
+ extends
+ ModelicaTest.Electrical.PowerConverters.ExampleTemplates.ThyristorBridge2mPulse(
+ pulse2m(constantFiringAngle=constantFiringAngle));
+ extends Modelica.Icons.Example;
+ import Modelica.Constants.pi;
+ parameter SI.Angle constantFiringAngle=30*pi/180
+ "Firing angle";
+ parameter SI.Resistance R=20 "Load resistance";
+ Modelica.Electrical.Analog.Basic.Resistor resistor(R=R) annotation (
+ Placement(transformation(
+ origin={30,30},
+ extent={{10,-10},{-10,10}},
+ rotation=90)));
+equation
+ connect(resistor.n, currentSensor.p)
+ annotation (Line(points={{30,20},{30,-40},{10,-40}}, color={0,0,255}));
+ connect(resistor.p, rectifier.dc_p) annotation (Line(points={{30,40},{-10,
+ 40},{-10,40},{-20,40}}, color={0,0,255}));
+ annotation (
+ experiment(
+ StopTime=0.1,
+ Tolerance=1e-06,
+ Interval=0.0002),
+ Documentation(info="
+This example shows a full controlled 2*m pulse bridge rectifier with resistive load, where m is the number of phases. In case of resistive load the full controlled bridge shows the same output voltage as the
+half controlled bridge.
+
+Plot current currentSensor.i, average current meanCurrent.y, voltage voltageSensor.v and average voltage meanVoltage.v.
+"));
+end ThyristorBridge2mPulse_R;
diff --git a/ModelicaTest/Electrical/PowerConverters/package.mo b/ModelicaTest/Electrical/PowerConverters/package.mo
new file mode 100644
index 0000000000..cc6c738303
--- /dev/null
+++ b/ModelicaTest/Electrical/PowerConverters/package.mo
@@ -0,0 +1,5 @@
+within ModelicaTest.Electrical;
+package PowerConverters
+ extends Modelica.Icons.ExamplesPackage;
+
+end PowerConverters;
diff --git a/ModelicaTest/Electrical/PowerConverters/package.order b/ModelicaTest/Electrical/PowerConverters/package.order
new file mode 100644
index 0000000000..bfd436f58a
--- /dev/null
+++ b/ModelicaTest/Electrical/PowerConverters/package.order
@@ -0,0 +1,4 @@
+Examples
+HalfControlledBridge2mPulse
+ThyristorBridge2mPulse_R
+ExampleTemplates
diff --git a/ModelicaTest/Resources/Reference/ModelicaTest/Electrical/PowerConverters/Examples/ACAC/Dimmer_R/comparisonSignals.txt b/ModelicaTest/Resources/Reference/ModelicaTest/Electrical/PowerConverters/Examples/ACAC/Dimmer_R/comparisonSignals.txt
new file mode 100644
index 0000000000..12f254543d
--- /dev/null
+++ b/ModelicaTest/Resources/Reference/ModelicaTest/Electrical/PowerConverters/Examples/ACAC/Dimmer_R/comparisonSignals.txt
@@ -0,0 +1,12 @@
+time
+voltageSensor.v
+multiSensor.i
+multiSensor.v
+multiSensor.power
+meanPower.y
+vRMS.y
+vH01.y_rms
+vH01.y_arg
+iRMS.y
+iH01.y_rms
+iH01.y_arg
diff --git a/ModelicaTest/Resources/Reference/ModelicaTest/Electrical/PowerConverters/Examples/ACAC/Dimmer_RL/comparisonSignals.txt b/ModelicaTest/Resources/Reference/ModelicaTest/Electrical/PowerConverters/Examples/ACAC/Dimmer_RL/comparisonSignals.txt
new file mode 100644
index 0000000000..12f254543d
--- /dev/null
+++ b/ModelicaTest/Resources/Reference/ModelicaTest/Electrical/PowerConverters/Examples/ACAC/Dimmer_RL/comparisonSignals.txt
@@ -0,0 +1,12 @@
+time
+voltageSensor.v
+multiSensor.i
+multiSensor.v
+multiSensor.power
+meanPower.y
+vRMS.y
+vH01.y_rms
+vH01.y_arg
+iRMS.y
+iH01.y_rms
+iH01.y_arg
diff --git a/ModelicaTest/Resources/Reference/ModelicaTest/Electrical/PowerConverters/Examples/ACAC/SoftStarter/comparisonSignals.txt b/ModelicaTest/Resources/Reference/ModelicaTest/Electrical/PowerConverters/Examples/ACAC/SoftStarter/comparisonSignals.txt
new file mode 100644
index 0000000000..13718d19c9
--- /dev/null
+++ b/ModelicaTest/Resources/Reference/ModelicaTest/Electrical/PowerConverters/Examples/ACAC/SoftStarter/comparisonSignals.txt
@@ -0,0 +1,29 @@
+time
+currentQuasiRMSSensor.i[1]
+currentQuasiRMSSensor.i[2]
+currentQuasiRMSSensor.i[3]
+voltageSensor.v[1]
+voltageSensor.v[2]
+voltageSensor.v[3]
+multiSensor.i[1]
+multiSensor.i[2]
+multiSensor.i[3]
+multiSensor.v[1]
+multiSensor.v[2]
+multiSensor.v[3]
+multiSensor.power[1]
+multiSensor.power[2]
+multiSensor.power[3]
+multiSensor.powerTotal
+rootMeanSquare.y
+rootMeanSquare.mean.x
+harmonic.mean1.x
+harmonic.mean2.x
+// imc.rotorCage.electroMagneticConverter.singlePhaseElectroMagneticConverter[1].Phi.re
+// imc.rotorCage.electroMagneticConverter.singlePhaseElectroMagneticConverter[2].Phi.im
+// imc.stator.electroMagneticConverter.singlePhaseElectroMagneticConverter[1].Phi.re
+// imc.stator.electroMagneticConverter.singlePhaseElectroMagneticConverter[2].Phi.im
+// imc.stator.zeroInductor.i0
+loadInertia.phi
+loadInertia.w
+softStartControl.vRef
diff --git a/ModelicaTest/Resources/Reference/ModelicaTest/Electrical/PowerConverters/Examples/ACDC/Rectifier1Pulse/Thyristor1Pulse_R_Characteristic/comparisonSignals.txt b/ModelicaTest/Resources/Reference/ModelicaTest/Electrical/PowerConverters/Examples/ACDC/Rectifier1Pulse/Thyristor1Pulse_R_Characteristic/comparisonSignals.txt
new file mode 100644
index 0000000000..2f1ee01b34
--- /dev/null
+++ b/ModelicaTest/Resources/Reference/ModelicaTest/Electrical/PowerConverters/Examples/ACDC/Rectifier1Pulse/Thyristor1Pulse_R_Characteristic/comparisonSignals.txt
@@ -0,0 +1,10 @@
+time
+meanCurrent.x
+meanVoltage.x
+rootMeanSquareVoltage.mean.x
+idealthyristor.off
+meanCurrent.y
+meanVoltage.y
+pulse2.twoPulse.timerNegative[1].entryTime
+pulse2.twoPulse.timerPositive[1].entryTime
+rootMeanSquareVoltage.mean.y
diff --git a/ModelicaTest/Resources/Reference/ModelicaTest/Electrical/PowerConverters/Examples/ACDC/RectifierBridge2Pulse/ThyristorBridge2Pulse_DC_Drive/comparisonSignals.txt b/ModelicaTest/Resources/Reference/ModelicaTest/Electrical/PowerConverters/Examples/ACDC/RectifierBridge2Pulse/ThyristorBridge2Pulse_DC_Drive/comparisonSignals.txt
new file mode 100644
index 0000000000..ceec488536
--- /dev/null
+++ b/ModelicaTest/Resources/Reference/ModelicaTest/Electrical/PowerConverters/Examples/ACDC/RectifierBridge2Pulse/ThyristorBridge2Pulse_DC_Drive/comparisonSignals.txt
@@ -0,0 +1,20 @@
+time
+dcpm.inertiaRotor.phi
+dcpm.inertiaRotor.w
+inductor.i
+lMains.i
+meanCurrent.x
+meanVoltage.x
+pulse2.twoPulse.filter[1].firstOrder.y
+pulse2.twoPulse.filter[1].transferFunction[1].x_scaled[1]
+pulse2.twoPulse.filter[1].transferFunction[2].x_scaled[1]
+rootMeanSquareVoltage.mean.x
+meanCurrent.y
+meanVoltage.y
+pulse2.twoPulse.timerNegative[1].entryTime
+pulse2.twoPulse.timerPositive[1].entryTime
+rectifier.thyristor_n1.off
+rectifier.thyristor_n2.off
+rectifier.thyristor_p1.off
+rectifier.thyristor_p2.off
+rootMeanSquareVoltage.mean.y
diff --git a/ModelicaTest/Resources/Reference/ModelicaTest/Electrical/PowerConverters/Examples/ACDC/RectifierBridge2Pulse/ThyristorBridge2Pulse_RLV_Characteristic/comparisonSignals.txt b/ModelicaTest/Resources/Reference/ModelicaTest/Electrical/PowerConverters/Examples/ACDC/RectifierBridge2Pulse/ThyristorBridge2Pulse_RLV_Characteristic/comparisonSignals.txt
new file mode 100644
index 0000000000..9344940d39
--- /dev/null
+++ b/ModelicaTest/Resources/Reference/ModelicaTest/Electrical/PowerConverters/Examples/ACDC/RectifierBridge2Pulse/ThyristorBridge2Pulse_RLV_Characteristic/comparisonSignals.txt
@@ -0,0 +1,14 @@
+time
+inductor.i
+meanCurrent.x
+meanVoltage.x
+rootMeanSquareVoltage.mean.x
+meanCurrent.y
+meanVoltage.y
+pulse2.twoPulse.timerNegative[1].entryTime
+pulse2.twoPulse.timerPositive[1].entryTime
+rectifier.thyristor_n1.off
+rectifier.thyristor_n2.off
+rectifier.thyristor_p1.off
+rectifier.thyristor_p2.off
+rootMeanSquareVoltage.mean.y
diff --git a/ModelicaTest/Resources/Reference/ModelicaTest/Electrical/PowerConverters/Examples/ACDC/RectifierBridge2mPulse/ThyristorBridge2mPulse_DC_Drive/comparisonSignals.txt b/ModelicaTest/Resources/Reference/ModelicaTest/Electrical/PowerConverters/Examples/ACDC/RectifierBridge2mPulse/ThyristorBridge2mPulse_DC_Drive/comparisonSignals.txt
new file mode 100644
index 0000000000..54d4a5d58b
--- /dev/null
+++ b/ModelicaTest/Resources/Reference/ModelicaTest/Electrical/PowerConverters/Examples/ACDC/RectifierBridge2mPulse/ThyristorBridge2mPulse_DC_Drive/comparisonSignals.txt
@@ -0,0 +1,39 @@
+time
+dcpm.inertiaRotor.phi
+dcpm.inertiaRotor.w
+inductor.i
+lMains.inductor[2].i
+lMains.inductor[3].i
+meanCurrent.x
+meanVoltage.x
+pulse2.twomPulse.filter[1].firstOrder.y
+pulse2.twomPulse.filter[1].transferFunction[1].x_scaled[1]
+pulse2.twomPulse.filter[1].transferFunction[2].x_scaled[1]
+pulse2.twomPulse.filter[2].firstOrder.y
+pulse2.twomPulse.filter[2].transferFunction[1].x_scaled[1]
+pulse2.twomPulse.filter[2].transferFunction[2].x_scaled[1]
+pulse2.twomPulse.filter[3].firstOrder.y
+pulse2.twomPulse.filter[3].transferFunction[1].x_scaled[1]
+pulse2.twomPulse.filter[3].transferFunction[2].x_scaled[1]
+rootMeanSquareVoltage.mean.x
+meanCurrent.y
+meanVoltage.y
+pulse2.twomPulse.timerNegative[1].entryTime
+pulse2.twomPulse.timerNegative[2].entryTime
+pulse2.twomPulse.timerNegative[3].entryTime
+pulse2.twomPulse.timerPositive[1].entryTime
+pulse2.twomPulse.timerPositive[2].entryTime
+pulse2.twomPulse.timerPositive[3].entryTime
+rectifier.pre_n[1].u
+rectifier.pre_n[2].u
+rectifier.pre_n[3].u
+rectifier.pre_p[1].u
+rectifier.pre_p[2].u
+rectifier.pre_p[3].u
+rectifier.thyristor_n.idealThyristor[1].off
+rectifier.thyristor_n.idealThyristor[2].off
+rectifier.thyristor_n.idealThyristor[3].off
+rectifier.thyristor_p.idealThyristor[1].off
+rectifier.thyristor_p.idealThyristor[2].off
+rectifier.thyristor_p.idealThyristor[3].off
+rootMeanSquareVoltage.mean.y
diff --git a/ModelicaTest/Resources/Reference/ModelicaTest/Electrical/PowerConverters/Examples/ACDC/RectifierBridge2mPulse/ThyristorBridge2mPulse_RLV_Characteristic/comparisonSignals.txt b/ModelicaTest/Resources/Reference/ModelicaTest/Electrical/PowerConverters/Examples/ACDC/RectifierBridge2mPulse/ThyristorBridge2mPulse_RLV_Characteristic/comparisonSignals.txt
new file mode 100644
index 0000000000..2053507105
--- /dev/null
+++ b/ModelicaTest/Resources/Reference/ModelicaTest/Electrical/PowerConverters/Examples/ACDC/RectifierBridge2mPulse/ThyristorBridge2mPulse_RLV_Characteristic/comparisonSignals.txt
@@ -0,0 +1,26 @@
+time
+inductor.i
+meanCurrent.x
+meanVoltage.x
+rootMeanSquareVoltage.mean.x
+meanCurrent.y
+meanVoltage.y
+pulse2m.twomPulse.timerNegative[1].entryTime
+pulse2m.twomPulse.timerNegative[2].entryTime
+pulse2m.twomPulse.timerNegative[3].entryTime
+pulse2m.twomPulse.timerPositive[1].entryTime
+pulse2m.twomPulse.timerPositive[2].entryTime
+pulse2m.twomPulse.timerPositive[3].entryTime
+rectifier.pre_n[1].u
+rectifier.pre_n[2].u
+rectifier.pre_n[3].u
+rectifier.pre_p[1].u
+rectifier.pre_p[2].u
+rectifier.pre_p[3].u
+rectifier.thyristor_n.idealThyristor[1].off
+rectifier.thyristor_n.idealThyristor[2].off
+rectifier.thyristor_n.idealThyristor[3].off
+rectifier.thyristor_p.idealThyristor[1].off
+rectifier.thyristor_p.idealThyristor[2].off
+rectifier.thyristor_p.idealThyristor[3].off
+rootMeanSquareVoltage.mean.y
diff --git a/ModelicaTest/Resources/Reference/ModelicaTest/Electrical/PowerConverters/Examples/ACDC/RectifierCenterTap2Pulse/ThyristorCenterTap2Pulse_RLV_Characteristic/comparisonSignals.txt b/ModelicaTest/Resources/Reference/ModelicaTest/Electrical/PowerConverters/Examples/ACDC/RectifierCenterTap2Pulse/ThyristorCenterTap2Pulse_RLV_Characteristic/comparisonSignals.txt
new file mode 100644
index 0000000000..b6d2f7db9f
--- /dev/null
+++ b/ModelicaTest/Resources/Reference/ModelicaTest/Electrical/PowerConverters/Examples/ACDC/RectifierCenterTap2Pulse/ThyristorCenterTap2Pulse_RLV_Characteristic/comparisonSignals.txt
@@ -0,0 +1,12 @@
+time
+inductor.i
+meanCurrent.x
+meanVoltage.x
+rootMeanSquareVoltage.mean.x
+meanCurrent.y
+meanVoltage.y
+pulse2.twoPulse.timerNegative[1].entryTime
+pulse2.twoPulse.timerPositive[1].entryTime
+rectifier.thyristor_n.off
+rectifier.thyristor_p.off
+rootMeanSquareVoltage.mean.y
diff --git a/ModelicaTest/Resources/Reference/ModelicaTest/Electrical/PowerConverters/Examples/ACDC/RectifierCenterTap2mPulse/ThyristorCenterTap2mPulse_RLV_Characteristic/comparisonSignals.txt b/ModelicaTest/Resources/Reference/ModelicaTest/Electrical/PowerConverters/Examples/ACDC/RectifierCenterTap2mPulse/ThyristorCenterTap2mPulse_RLV_Characteristic/comparisonSignals.txt
new file mode 100644
index 0000000000..cb69bf2ec0
--- /dev/null
+++ b/ModelicaTest/Resources/Reference/ModelicaTest/Electrical/PowerConverters/Examples/ACDC/RectifierCenterTap2mPulse/ThyristorCenterTap2mPulse_RLV_Characteristic/comparisonSignals.txt
@@ -0,0 +1,20 @@
+time
+inductor.i
+meanCurrent.x
+meanVoltage.x
+rootMeanSquareVoltage.mean.x
+meanCurrent.y
+meanVoltage.y
+pulse2m.twomPulse.timerNegative[1].entryTime
+pulse2m.twomPulse.timerNegative[2].entryTime
+pulse2m.twomPulse.timerNegative[3].entryTime
+pulse2m.twomPulse.timerPositive[1].entryTime
+pulse2m.twomPulse.timerPositive[2].entryTime
+pulse2m.twomPulse.timerPositive[3].entryTime
+rectifier.thyristor_n.idealThyristor[1].off
+rectifier.thyristor_n.idealThyristor[2].off
+rectifier.thyristor_n.idealThyristor[3].off
+rectifier.thyristor_p.idealThyristor[1].off
+rectifier.thyristor_p.idealThyristor[2].off
+rectifier.thyristor_p.idealThyristor[3].off
+rootMeanSquareVoltage.mean.y
diff --git a/ModelicaTest/Resources/Reference/ModelicaTest/Electrical/PowerConverters/Examples/ACDC/RectifierCenterTapmPulse/ThyristorCenterTapmPulse_RLV_Characteristic/comparisonSignals.txt b/ModelicaTest/Resources/Reference/ModelicaTest/Electrical/PowerConverters/Examples/ACDC/RectifierCenterTapmPulse/ThyristorCenterTapmPulse_RLV_Characteristic/comparisonSignals.txt
new file mode 100644
index 0000000000..d8b2a856e5
--- /dev/null
+++ b/ModelicaTest/Resources/Reference/ModelicaTest/Electrical/PowerConverters/Examples/ACDC/RectifierCenterTapmPulse/ThyristorCenterTapmPulse_RLV_Characteristic/comparisonSignals.txt
@@ -0,0 +1,17 @@
+time
+inductor.i
+meanCurrent.x
+meanVoltage.x
+rootMeanSquareVoltage.mean.x
+meanCurrent.y
+meanVoltage.y
+pulsem.twomPulse.timerNegative[1].entryTime
+pulsem.twomPulse.timerNegative[2].entryTime
+pulsem.twomPulse.timerNegative[3].entryTime
+pulsem.twomPulse.timerPositive[1].entryTime
+pulsem.twomPulse.timerPositive[2].entryTime
+pulsem.twomPulse.timerPositive[3].entryTime
+rectifier.thyristor.idealThyristor[1].off
+rectifier.thyristor.idealThyristor[2].off
+rectifier.thyristor.idealThyristor[3].off
+rootMeanSquareVoltage.mean.y
diff --git a/ModelicaTest/Resources/Reference/ModelicaTest/Electrical/PowerConverters/Examples/DCDC/HBridge/HBridge_DC_Drive/comparisonSignals.txt b/ModelicaTest/Resources/Reference/ModelicaTest/Electrical/PowerConverters/Examples/DCDC/HBridge/HBridge_DC_Drive/comparisonSignals.txt
new file mode 100644
index 0000000000..988b6ccff0
--- /dev/null
+++ b/ModelicaTest/Resources/Reference/ModelicaTest/Electrical/PowerConverters/Examples/DCDC/HBridge/HBridge_DC_Drive/comparisonSignals.txt
@@ -0,0 +1,10 @@
+time
+dcpm.inertiaRotor.phi
+dcpm.inertiaRotor.w
+inductor.i
+meanCurrent.y
+meanVoltage.y
+hbridge.vDC1
+hbridge.iDC1
+hbridge.vDC2
+hbridge.iDC2